Roseand's latest activity
-
Roseand replied to the thread Best Battery for a Non charging motor setup.Do you know any specific differences between the etx besides the increased a/h per pound? A little Google searching and all I can find... -
Roseand replied to the thread Cooling Line Material and Clamps.Push to connect fittings with nylon tubing. Nylon tubing works fine on barbs as well. Also use the colored silicone hose with standard...
-
Roseand replied to the thread DIY Total loss or MSD TL upgrade box 270USD?.A 62t or 61x coil will work but you'll need to isolate the ground on it. I just made an adapter so I wouldn't have to cut the wire. It's...
-
Roseand replied to the thread What is a good 61x/61x short block price?.^^^ agreed. I've seen many, and purchased a longblock as clean as they come for 600ish shipped. @Kyle Chandler has a clean shortblock...
-
Roseand replied to the thread Not enough rotation (Back Flips).You are getting close but definitely need to slow down! I learned to flip with a 701 as well. I ride on a well populated and policed...
-
Roseand replied to the thread What's your view look like today?.Machine shops are closed so I took matters into my own hands.. First pic is after a minute of sanding after I painted it. Took 10...
-
-
Roseand replied to the thread Differences Between Yamabond Compounds.Last year I used hondabond because it was cheap, and I wiped it off the cases and bought a tube of 1211. I find it way easier to work...
-
-
-
I can't see super well what's going on there, but I'm guessing Yamaha doesn't consider that to be damaged, it doesn't affect the...
-
EVERYTHING MUST HAVE A ZEEL!!
-
Roseand replied to the thread Baller on a budget RIP.Straight 2.5 inch tubing works just fine and is cheap. Just make sure to add a support underneath it towards the engine side to act like...
-
Roseand replied to the thread Baller on a budget RIP.You'll be happy with your setup in your rip for sure. I ran a ported 61x top end/unported bottom with a single 44 and a 144mm pump for a...
-
Roseand replied to the thread Baller on a budget RIP.Do you have stock in MSD or something? I've never met anyone that advises against one of the best bangs for your buck you can do as much...
-
Never been ported at all.... bought the ski brand new from the dealer so I know the history.... I guessing my gauge is off.... its just...
