Recent content by Zac.Mi11er

Sorry for the confusion. It doesn’t fire when I press the start button. I can get it to fire when jumping the solenoid. Everybody says I can check the start/stop switch by unplugging the black connector before the ebox but there isn’t one. It just runs straight into the ebox. Lmk what y’all...

My bad. So I picked up another cdi but it still won’t fire. I checked the spark when jumping the solenoid & I got spark now (which I didn’t have with the original cdi). I’m stuck on where to go now. My only other thought is the start/stop switch? Any other ideas? Sent from my iPhone using Tapatalk

Aright so I picked up a cdi. Still won’t fire but when I jump the solenoid but now I got a strong spark again?! (It didn’t have a spark before) Now what? I’m lost Sent from my iPhone using Tapatalk

Check fuse. It’s good. I think ground is good. No spark when I jump solenoid. Lmk what y’all think. Sent from my iPhone using Tapatalk

I got it to crank when I jumped the solenoid. When I just try to start it normally there’s nothing. No click, just nothing. Sent from my iPhone using Tapatalk

So I have a 300sx with a 701 dropped in. At the end of last summer I think some water got in the hull. It would start, run really rough, & die 30 seconds later. I got it back to the beach. It seemed to be running really hot too. I drained the water & had to go back to school that weekend. This...

701 and b pipe dropped in

Sup guys. So I just bought a build 300 and I think it might be your exact ski. Some things are slightly changed but I think it’s it. Just finished up the trim and hoping to flip it this summer...