- Location
- Coeur D' Alene, ID
Freestyle Fuel Starvation
- Thread starter Citizen
- Start date
- Location
- Granbury, TX
Either way... carbs are too small, but can we all agree that the tee'd pulse lines are the root of the initial issue? 
- Location
- Coeur D' Alene, ID
Credit where credit due smoofers!
- Location
- Coeur D' Alene, ID
Quick update...
After all your guy's great feedback I decided to make some FS happen. Ended up with Dual 48 full spec's with vf3 reeds. They were jetted 130m 120p for my same motor at 600', I am at 2000'. If i am remembering correctly if anything I would need to go down a few sizes in the jets due to my altitude right? I was running 135m 125p on my 38's so went up 10mm on carbs and down on the jets with these FS carbs.
Just wondering if i need to change the jetting before I even water test or if i should be ok with 130/120.
Thanks for the help as always.
After all your guy's great feedback I decided to make some FS happen. Ended up with Dual 48 full spec's with vf3 reeds. They were jetted 130m 120p for my same motor at 600', I am at 2000'. If i am remembering correctly if anything I would need to go down a few sizes in the jets due to my altitude right? I was running 135m 125p on my 38's so went up 10mm on carbs and down on the jets with these FS carbs.
Just wondering if i need to change the jetting before I even water test or if i should be ok with 130/120.
Thanks for the help as always.
- Location
- Charlotte NC
In my experience, full specs do not work well with reverse jetting.
DAG
Yes, my balls tickled from that landing
- Location
- Charlotte, NC
You got full specs, call Ed. He will get you in the ballpark
- Location
- Coeur D' Alene, ID
- Location
- Coeur D' Alene, ID
Unless i am misunderstanding, these are not reverse jetted. 130 main and 120 pilot.
- Location
- Charlotte NC
- Location
- North Carolina
http://www.mediafire.com/file/wtwgnmjgxtm/Mikuni+Super+BN+Manual.pdf
Read this.. Then read it 3 more times.
Read this.. Then read it 3 more times.
- Location
- Coeur D' Alene, ID
1 down, 3 to go. Good read, even stayed awake for it!
- Location
- Saskatchewan
good read, learned lots from this. GL with your issues.
- Location
- Coeur D' Alene, ID
Yep lots of great info, learned a lot. Love this community