Need some help with footholds

Joined
Jan 10, 2008
Likes
0
Location
Pittsburgh
#1
So I just bought a 2010 stock Superjet and it has footholds installed but the HydroTurf job is not good! The previous owner had them "Professionally" installed and does not know the make of the footholds were used. I need help figuring out which foothold they are. I want to make sure I get the right Hydro kit!
Took a look and let me know. Any tips for installing the new turf would be greatly appreciated.

Thanks,
Ryan

IMG_0297.jpg IMG_0298.jpg IMG_0055.JPG
 

Sanoman

Just an old SuperFreak
Joined
Jun 23, 2009
Likes
1,146
Location
NE Tenn
#3
There won't be a kit as Laxpro said,so you will need to buy a couple sheets of turf.Might as well figure new padding as well.
Best thing that will help you is making your own templates.That is the way to get a great looking job.
 
Joined
Jan 23, 2006
Likes
389
Location
Midland, Ontario, Canada
#5
Those look like EME footholds and I would be surprised if they were professionally installed...they don’t look glassed in very well if at all and since you are redoing them you really should lay a couple layers over the seams.
 
Joined
Jan 23, 2006
Likes
389
Location
Midland, Ontario, Canada
#8
IF funds allow I would replace them with a different style that gives you more room and a better foot position...but be prepared you will probably find wet foam in the tray so may want to research that topic.
 
Joined
Jan 10, 2008
Likes
0
Location
Pittsburgh
#10
Thanks for all your help guys! I think I will take your advise and remove them. I hope that the foam isn't soaked, I really don't want to have to go through all that work!:(

Thanks again,
Ryan