Search results

  1. fastgtfairlane

    Has anyone put a Yamaha 701/760 in a SXR800 hull?

    If anything the 760 will produce less low end torque than the 800. People underestimate the power output of the 800. It has better port timing than the 760 as well. The 800 has the same port timing as the #22 small pin 750 cylinder which is a great all around setup. The cases are even tunnel...
  2. fastgtfairlane

    Austrailia's Sky News about America is not Censored

    that might work if california doesnt loose all of its residents before then haha
  3. fastgtfairlane

    Has anyone put a Yamaha 701/760 in a SXR800 hull?

    i dont see any benefit to putting a 701 in a sxr other than possibly trying freestyle. the 800 engine makes more power than a 701 stock for stock.
  4. fastgtfairlane

    Building a PJX X-1C

    who built them originally? seems team twangled is buying all of the older molds out there
  5. fastgtfairlane

    Building a PJX X-1C

    are those still being built?
  6. fastgtfairlane

    Air Blair Hull Review

    i rode one air blair had a Carolina beach last year or year before. i was super impressed with it. it was a fixed steer setup. the position and location of the bars on the fix steer is absolutely perfect. far enough forward that the ski wont ride super nose high which is hard with a short ski...
  7. fastgtfairlane

    Super Jet advice on what to do next

    Disassemble the engine is the only thing left to do so you know what you're working with then go from there
  8. fastgtfairlane

    Oops..

    Yikes
  9. fastgtfairlane

    DIY Total loss or MSD TL upgrade box 270USD?

    a zeel facebook page? ohh boy its only going down hill from there haha
  10. fastgtfairlane

    650/X-2 X2 build help!

    all good information in post above. just differnce in opinion and what youre working with doing fiberglass. i prefer building up laminate with more thinner layers rather than something like biax becuase it takes soo much resin to properly wet out. example- 2 layers of 1208= 24oz, 3 layers of 8oz...
  11. fastgtfairlane

    Is it possible to access jets without removing carbs from ski?

    Get your impeller right then focus on carb tuning. You get it dialed with the impeller you have, you'll probably have to do it again after you get the impeller right since your current one isnt loading the engine enough.
  12. fastgtfairlane

    Is it possible to access jets without removing carbs from ski?

    i like to use a thin layer of assembly lube on the gaskets when they are new. the grease film will keep the gasket from tearing apart when removing the carbs
  13. fastgtfairlane

    Adjustable BOB or Hurricane Footholds

    id recommend the rrp ninja setup or tigercraft sells a setup almost identical to the rrp ninja adjustable setup. im not sure if the bob hold kit is being made any longer. what i like about the ninja and tigercraft setup is the holds wrap around your foot more than the bob setup does.
  14. fastgtfairlane

    RN waterbox or equivalent

    i had a oem waterbox that i sold locally for 160 bucks. i upgraded to a jetmaniac box. very nice piece and only 60 more than a used oem. better tone, not a lot louder and it fits like a glove, especially with the rockered nose on my RN. i did add a layer of 26mm underpading and a layer of turf...
  15. fastgtfairlane

    Wet jet pipe 61x

    its a good budget pipe comparable performance to a protec or riva pipe
  16. fastgtfairlane

    Stinger and fuel tank spacing

    the other option is just to get a sj tank. youll have to slightly relocate the battery box. a riding buddy had the same issue youre having. has a tdr waterbox, mod chamber. his actually rubbed a hole in his chamber. he basically used a piece of 1/4 thick aluminum stock, bolted it to the...
  17. fastgtfairlane

    Superjet spark plugs opinion?

    the color doesnt look bad really but the only way to get an accurate plug reading is with a 10x magnifying glass so you can really see what the ground electrode looks like as well as down in the plug. also need to shut the engine down with the engine running at max throttle because as soon as...
  18. fastgtfairlane

    Can you install my footholds and mat? South Florida

    +1 on the blowsion holds. my superjet had blowsion holds when i got it and they were terrible. thats why i went to the adjustables. theyre a bit more pricey but worth it in my opinion. and kicking into them feels like kicking into foam.
  19. fastgtfairlane

    Can you install my footholds and mat? South Florida

    thanks! i used tigercraft adjustable footholds which are almost identical to the rrp ninja adjustable holds. more work to install but a little easier to turf.
  20. fastgtfairlane

    Can you install my footholds and mat? South Florida

    its really not difficult to install them yourself. first time i ever attempted fiberglass work was on my old 550 putting in footholds and widening the tray at the same time. i did some reading on the forums and theres also videos on youtube on how to install footholds. same with the turf. just...
Top Bottom