Superjet Bolts/Fasteners Charts

2lick

2lick

Brap!!!
Location
Limerick, PA
Superjet Bolts/Fasteners Charts V2.0

Here:

Public Viewable: <Valid Link As Of 01/2018> https://docs.google.com/spreadsheets/d/1j8F5ofV7KIqKgwrLjwVdSYstcHl7CglDndwGgo7lgUA/edit?usp=sharing

EDIT: To be able to edit all you have to do is click the link below and sign in.
NOTE: You do not have to have a GMail to edit it. You can use any email to sign up with Google docs.

Sign in and Edit: spreadsheets.google.com/ccc?key=p0d1hKt6wRU7U4xe2YmkVZg&hl=en

I put this all in a Google doc so we all can edit it. To be added as a collaborator use the link above, then those that are collaborators can invite more people.


Cool stuff about the Google doc instead of a thread:
- anyone can add to the list so I don't have to keep it up to date
- it is all in one document see the tabs to click on each sheet
- you can chat with others who are editing it when you are, will help with collaboration
- you can mark settings to notify you when it has been changed
- its published and searchable from Google
- anyone can use it
- you can view the revision history all the time so you know who posted what...
 
Last edited:
2lick

2lick

Brap!!!
Location
Limerick, PA
Yeah but i filled in about all I know.... I am going to try and pick up a guage... any one have any data.... And fyi i already went through the FAQ's
 
michael950

michael950

for me to POOP on!
Location
Houston, TX
Bed Plates (14mm socket):
Sz8 - Qty 5 - M10 x 1.25 x 70mm (30mm threaded)
Sz8 - Qty 1 - M10 x 1.25 x 80mm (30mm threaded)
Sz8 - Qty 1 - M10 x 1.25 x 35mm (Fully threaded)


Starter:
Sz8 - Qty 2 - M8 x 1.25 x 40mm (25mm threaded)


Cases (12mm Socket):
Sz8 - Qty 8 - M8 x 1.25 x 85mm (25mm threaded)


Cylinder to Cases: (14mm socket)
Sz8 - M10 x 1.25 x 55 (30 threaded)
Sz8 - M10 x 1.25 x 40 (30 threaded)

Head (12mm socket):
Sz8 - Qty 10 - M8 x 1.25 x 50mm (25mm threaded)


Stator Cover (10mm socket):
Sz6 - Qty 7 - M6 x 1.00 x 25mm (Fully threaded)


62T Intake Manifold (10mm Socket):
Sz8 - Qty 8 - M6 x 1.00 x 25mm (Fully threaded)
Sz8 - Qty 3 - M6 x 1.00 x 35mm (20mm threaded)

Reed Screws - (Pan-Phillips Machine Screw)*
Qty 4 - M5 x 0.80 x 15mm

Carb Flanged Nut:
M6 x 1.25

Coupler cover:
Sz6 - Qty 2 - M6 x 1.00 x 25mm (Fully threaded)

*Updated 2-6-07


Please note the provided bolt information was obtained using a thread (pitch) gauge included in a Craftsman metric tap and die set. I know the pitch is accurate. The only thing that will very are the bolt lengths, and if there are any variations they will be slight (+/- 1mm).
 
Last edited:
2lick

2lick

Brap!!!
Location
Limerick, PA
I updated the 62t one..... i changed the format a litle too makes it easier to read....

Thanks Michael.. i put in waht you posted but i gotat go home to figure out some of them... like wich bedplates bolt go where....

ill get to the others tonite...
 
hangtime

hangtime

Speak up ,don't kiss azz
Location
WORCESTER,MASS- HAMPTON N.H.
Most people don't change these but I did because I hate the black phillips head bolts on the stock air box .

18-8 Stainless allen head replacement from Mcmaster

m5 thread
55mm length
.8 pitch
mcmaster part # = 91292A690:biggthumpup:

Mcmaster part # for the head bolts is 91292A154 for allen head replacements which look mint on aftermarket heads
 
Last edited:
2lick

2lick

Brap!!!
Location
Limerick, PA
still working on it... the 62t is mostly updated now and condensed some.... i got a lot of the part numbers and lenghts filled in too.....

FILL IN MY BLANKS!!!
 
You must log in or register to reply here.
Top Bottom