Search results

  1. S

    I was reading through one of the hull posts on the forum and read that you would be selling your...

    I was reading through one of the hull posts on the forum and read that you would be selling your superfreak after June, I realize is been a while but wanted to ask if the ski was sold?
  2. S

    Engine tuning

    awesome thanks for the tip, I will give it a try see how it goes, thanks again
  3. S

    Engine tuning

    awesome thanks for the info
  4. S

    Engine tuning

    Thank you for the responses Kevbo, what do you mean by 4 cycling? Is the roughness or vibration common? Is it more common with upgraded engines? I don't remember my stock engine doing it much but it does seems to be more of a trend with my more upgraded engines, this engine seems to be the...
  5. S

    Engine tuning

    Reaching out for some tips on tuning my rebuilt engine. I have a DASA 950 that was modified with a 4mm stroke , running black jack 44s with a zeeltronic(wax curve) b-pipe, pump gas, vforce 3 reeds. Engine has been reassembled and is operating. I ran 10 gallons of 25:1 mixed gas for break in...
  6. S

    Engine Rebuild performance issue

    I'm running the wax curve, I believe Ithis puts me ok on the timing advance. Ill try and richen it up, thanks
  7. S

    Engine Rebuild performance issue

    Looking for some suggestions on an engine concern. Just recently rebuild a DASA 950 5mm stroker with new pistons on 2nd bore, with a rebuilt crank. Added a Zeeltronic and Vforce 3 reeds with the rebuild. The engine is running rough at lower RPMs, feeling shaky and unbalanced, it often dies...
  8. S

    Which reed stuffer?

    Hi, I was hoping for some feedback. Recently purchased VForce 3 reeds for my rebuild and they came with 2 sets of reeds stuffers. Any recommendation for which stuffer to use? Any significant differences between the 2 styles ? I attached pictures of the stuffers and my intake. Any feedback...
  9. S

    Zeeltronic wiring

    Sweet, thanks yes it is fused
  10. S

    Zeeltronic wiring

    Will this still charge the battery? if the charge coils not being plugged in will allow for battery charging? Is that a whole different thing?
  11. S

    Zeeltronic wiring

    Thanks man appreciate the help
  12. S

    Zeeltronic wiring

    Thank you. I was wrong on my colors, the orange is direct to the coil and my pink was unused. I wired my pink to ground with a splice in the middle to allow for switching I wanted to double check with the green wires from the mag cover. There are two, both of these should be plugged directly...
  13. S

    Zeeltronic wiring

    Hi, its my first time installing a zeeltronic and was hoping to get a little help and feedback with the wiring. I attached a picture of my wiring I have supplied a fused power wire to the zeel but am not sure if all the wiring is correct, I have 3 leads that i don't see a connection for...
  14. S

    Zeeltronic programming

    No cable just the zeeltronic cdi
  15. S

    Zeeltronic programming

    I just purchased a zeeltronic CDI, the spec sheet provided shows it is setup for the 3 lobe flywheel design, however my flywheel has the 3rd lobe removed. Any suggestions to fix this? Would anyone be willing to program my zeeltronic for the 2 lobes? Price? Thanks
  16. S

    Spark Plugs

    Thanks appreciate the info if i understand it , most everyone is happy with the BR9EYA? and that the gap plug should be around 15 to 20 thousand? If you develop early fouling try bumping up in the heat range?
  17. S

    Spark Plugs

    Hi Guys I was hoping to ask for a little feedback regarding spark plugs. I had a DASA 950 engine with a 4mil stroke that was hesitating here and there through mid throttle. I thought this might just be a spark plug issue so I decided to purchase replacements, I choose to go with the iridium...
Top Bottom