Attn: SXR Riders

[D Slicker]

I will take you up on that challenge..... :cool2:

I have barreled an sxr off about 1' high surf. probly about the same as a setup wake.

You bring the boat...

That was my boat :Banane01: . One day I will be able too:banghead:

 

[Scorn800]

If you comparing a stock sj to a stock sxr. The sxr kills the sj in everyway.
The sxr is the best all alround boat in my opinion. You can rip turns and jump wakes it will just be a lot harder to flat water roll.

 

[PancakePete]

If you comparing a stock sj to a stock sxr. The sxr kills the sj in everyway.
The sxr is the best all alround boat in my opinion. You can rip turns and jump wakes it will just be a lot harder to flat water roll.

I think he likes kawy's !:cool2: Not sure though ! :scratchchin: :biggrin:

 

[yama_freak615]

I will take you up on that challenge..... :cool2:

I have barreled an sxr off about 1' high surf. probly about the same as a setup wake.

You bring the boat...

i am curious as to how u did this, i can barely get em outta the water.

 

[oxnard111]

I love me some KY:fing02: ... Now get all those ideas out of your heads, I love me some Kawasakis and Yamahas... you sickos

 

[Scorn800]

I think he likes kawy's !:cool2: Not sure though ! :scratchchin: :biggrin:

You got me their, What can I say, I bleed green.:biggthumpup:

 

[PancakePete]

i am curious as to how u did this, i can barely get em outta the water.

Look at the top of the page... It was D slickers sxr I rolled. It is tech. and a little nuts to try. It is really not that hard. Next time we all ride flat I will get pics or vid. :Banane01:

I think D slicker setup is awesome. especially with the XMETAL pole.. BLING ! Brap !

WOrd !

 

[djkorn1]

Whatcha got on there DSlick?

Mine is basically

Wet Pipe
Head
Flame Arrestors
Vilder Flywheel
-2 UMI pole
UMI Bars

I actually think I will be able to roll it off of like 2 footers. Especially after I chop that big ass rideplate off.

 

[D Slicker]

Whatcha got on there DSlick?

Mine is basically

Wet Pipe
Head
Flame Arrestors
Vilder Flywheel
-2 UMI pole
UMI Bars

I actually think I will be able to roll it off of like 2 footers. Especially after I chop that big ass rideplate off.

DJ, here is what im running. I still have to tune the pipe alittle more. By the way your ski looks SICK....:hail:

Thanks Pete.

Board Nozzle 80mm
Wet Wolf Cone
13/18 Skat-Trak impeller
Milled Head for 93 octane
Stock Carbs re-jetted
Factory Wet Pipe
X-Metal -2 pole (-4 from stock)
Limiting rope
UMI Steering and Bars
ODI's Rouge 130’s
Blowsion Kicker Footholds and mats
Composite rails
Blowsion Billet Hold Latches
Hood Straps
500 gph bilge

 

[kingnothing3]

I own an sj and my cousin has a stock sxr with footholds. I myself am just figuring out how to perfect my flatwater rolls. the sj is much easier but i rode the sxr last week, tryed rolling it 5 times and on the fifth try i had it 3/4 or the way around. with a little more bottom end im sure i could nail it on his ski. With some bottom end and good technique both machines can be used for flatwater freestyle. but you could save yourself alot of work and get an sj!

 

[FL-cracker]

Not sure if you guys had seen it yet, but over at pwc tomorrow someone had someone else modify there waterbox, and they are talking like it made a big improvement.

Its under Harrry Klem Group K

ditch the sxr waterbox?

 

[djkorn1]

Yeah, there is a guy that modifies them. You can't ditch them or they run like crap. That was Gil

D slick.. we have similar set ups... except mine is UMI pole and yours is XMetal.

If you get the chance, a flywheel makes a huge difference in your bottom end!

 

[FL-cracker]

^^^^Yea, I know, I was just reffering to the name of the thread.

 

[D Slicker]

Yeah, there is a guy that modifies them. You can't ditch them or they run like crap. That was Gil

D slick.. we have similar set ups... except mine is UMI pole and yours is XMetal.

If you get the chance, a flywheel makes a huge difference in your bottom end!

DJ, I am in the process of either a 3DR hood or a RAD flywheel (same price). I may do both :Banane01: I would send mine out to get lighted but i dont want the down time.

 

[djkorn1]

Don't get it lightened.... The aluminum ones add 2x the brap of the lightened ones.. screw the hood. Do it next year! :cheer:

 

[D Slicker]

Don't get it lightened.... The aluminum ones add 2x the brap of the lightened ones.. screw the hood. Do it next year! :cheer:

I orderd the flywheel ten minutes after I wrote that. :Banane01: :Banane01: :Banane01:

 

[skysurfer2010]

i first had a squarenose Sj stock and really didn't like it. i sold that to a friend and bought a new sxr last year. i rode it all summer loving the hell out of it and had no interest in getting another sj.

i wanted to give an sj another shot so i bought a nicely modded roundnose off scorn this winter and after riding it for the first two times, i fell in love with it. i was a hardcore defender of the sxr and loved it before. it carves great and is fun to cruise around on. i thought it was decent at jumping wakes too... until the roundnose came around! the sj is so much more fun and way easier to get airborn. you couldn't tear my sj away from me now!!

the sxr will get sold this summer.

 

[63chevyll]

hey i remember when pete was throwing sxi's around.

im sure he can toss an sxr around as easy

 

[Rickster]

they each have there place............ years ago, The SJ did both well, but once the SXR was released, Bye Bye Racing on a SJ............

Tell that to Paul Patchowski (sp)...:biggrin:


I know, I know, he made the switch this year....

 

[AlbanyMotorsports]

You can def roll an SXR. I have rolled one with footholds and one with tray lifters. We have an Octane that we flat water roll. If you can roll the barge then you can roll the SXR.