pro-tec trim system

[EXPERIMENTAL]

Does anyone know the factory bore of the nozzel on the pro-tec trim system for the superjet?

 

[BombThreat]

mine was 83mm at the reduction nozzle. its the one with the internal fins

 

[EXPERIMENTAL]

i wasn't trying to take pictures of the nozzle, i was just trying to get the mag pump, but this is the only pictures i have

 

[#ZERO]

It depends on which Pro-Tec reduction nozzle you have and when it was manufactured. Some had the fins inside and some did not have them but they're all around 83mm to 85mm in diameter and the extended steering nozzles have an oval shape like most that are 86.5mm tall to 88mm wide.

 

[EXPERIMENTAL]

by these pictures anyone know which size i have?

 

[#ZERO]

It looks like a later Pro-Tec nozzle with the fins inside.

I'd say 83mm but you could just remove the steering nozzle and measure it to find out the exact diameter.

 

[EXPERIMENTAL]

true, i know im being lazy, but the ski is at the lake anyway (hour drive) just trying to get info the easy way....haha:biggthumpup: