Search results

Neither of the springs that came in the kit match the existing spring. Spring on the right was in the carb, gave a pop off pressure of ~50. I installed the dull silver spring that came with the kit and got a popoff around 25. Since it ran very well before this issue, it seems like I should stick...

I would agree with you on the tank venting, but if the tank was not venting the primer would also not work. I also pulled off the fuel return hose while the ski was idling and fuel was returning to the tank. When I have experienced tank venting issues on other vehicles, it will usually run fine...

Spark plugs looked fine but I changed them anyway. I don't trust my compression tester beyond telling if two cylinders match, which they did. I was able to get the ski up to speed by working the primer, so it is definitely a fuel delivery issue. I checked pop off pressure and it is ~50psi, which...

Thanks for the tips. I did jump but it wasn't that "hard" of a landing. Also, my skis are at a weekend vacation house so they don't get ridden all that many hours each year. That is also part of the issue fixing it, I have to plan ahead with tools and parts. I have never been in the carb of this...

'92 Superjet. Factory pipe, high compression head, otherwise stock under the hood. Has been completely reliable for 4 years. Last weekend I jumped a wake and the ski immediately died upon landing. It will crank but barely runs, using the primer I can nurse it over to the bank. It starts and...

Found a crack in my SN superjet hull this weekend, and while removing the gas tank and exhaust to get to the crack I noticed most of the rubber pads that prevent things from rubbing through the hull are loose. Has anyone found an adhesive that lasts? I've tried a variety of things on other...

I need to take you up on this! Clear your PM box!