Search results

People's lack of consensus on foam to use and vids like this ultimately lead me to beer pong. Sent from my 2PS64 using Tapatalk

Here's my own currently putting it back together. https://r.tapatalk.com/shareLink?url=https://www.x-h2o.com/index.php?threads/superjet-defoam-and-rrp-adjustable-foot-hold-install.188830/&share_tid=188830&share_fid=3076&share_type=t Sent from my 2PS64 using Tapatalk

I'll share a couple links with you that inspired my recent SuperJet work. http://www.x-h2o.com/index.php?threads/ping-pong-balls-defoam-tray-widening-zero-sj-sponsons-plus-more.76412/ https://karlcorp.wordpress.com/balld/ Best of luck with your project [emoji106] Sent from my 2PS64 using...

Perfect thanks! Sent from my 2PS64 using Tapatalk

Cpolaris502 did you get the surf or FW hull? Sent from my 2PS64 using Tapatalk

The link isn't working? Sent from my 2PS64 using Tapatalk

Thank you! You are kind of right they aren't ping pong balls at all. So if I needed to use ping pong balls I'm screwed. If my memory serves me correctly ping pong balls are 40mm and made of celluloid. Celluloid will break down in water over time. I used "washable beer pong balls" they are...

Once I get the whole ski done you'll see the look I'm going for patience please it's a work in progress. "patience patience patience Brett" that's what I tell myself when I'm waiting for epoxy to dry. Sent from my 2PS64 using Tapatalk

Sweet! I do plastic skis, Gas Shocks, xtra-10, comet 108EXPs as a base line and tweak from there. Did you get yours titled? Mines titles and registered too... No power plants around to warm any water. Put my registration up the pole. Fit just right. Sent from my 2PS64 using Tapatalk

Lol good eye. When I'm not wrenching on a ski I'm resto-modding liquifires. [emoji48] [emoji23] Sent from my 2PS64 using Tapatalk

Well I had the plastic layed over the balls and taped off tight all the way around... And I can look into the tray through the drains and still see my balls. [emoji23] Also the amount of 2 part foam I used was minimal and still had it coming out the top of the rails. If I would have had a...

Sanded the first lay up of fibreglass down smooth. Now I'm going to lay up the entire tray and rails again for reinforcement. Pre cut and laid out the cloth. Going to let it sit a day or two to let and folds from being packaged work themselves out a bit. (Also I'm waiting on some resin) I...

Checking for loose bolts is always good preventative maintenance and is recommended in most atv/utv/pwc manuals. I found no loose bolts on mine, I will check again after the first 3 hours of break-in. And then again after each hard day of riding... It's just a good habbit to get into. Only...

No they do not come broke-in. Nick put a video together on recommended break in. Just waiting for water temps to get into the 40s to do so. Sent from my 2PS64 using Tapatalk

Not yet air temp is still only 40 degrees Fahrenheit here. Sent from my 2PS64 using Tapatalk

Thanks, it the Wamiltons Gen 4 light weight hood. Sent from my 2PS64 using Tapatalk

I then defoamed the hull, found the cooling line and the steering cable line to be leaking foam was wet in right side. I don't believe in the pipe lean anymore. Skis lean to the right because wet foam starts on the right. Your exhaust, cooling line, and steering cable line all run through the...

First I used a dremel to cut out the sides bit by bit, then I realized I was going to have to cut back on the rear all the way to the line the stock turf wraps to. I did the left side first because I knew the exhaust was going to present some challenges in the right side. Dug the foam out of...

First time starting a thread as don't be too harsh. This past summer I noticed my 96 SuperJet was leaning more to the right than my 14 sj. Both have b pipes both running the same battery. So pipe lean or heavy battery excuse wasn't going to cut it. Decided I probably had some wet foam good...

Here you go short clip of start and idle. This is only it's third start. Sent from my 2PS64 using Tapatalk