Search results

Looking for skat E75 6/12 with 5mm cutback. Please message me.

Remove

Got one, thanks all!

Over $30 shipped from Yamahapartshouse. Com

Thanks but I only need the cap.

Anyone have a cap for the fire extinguisher compartment on a RNSJ? Mine is cracked and takes on water constantly. Tried fixing with marine epoxy and won't stick for more than one ride.

The pool test is a great idea but also fill the tray with water. That will insure you sealed it properly inside the tray. When I filled mine, I was leaking water into the engine compartment from the steering tube. If you decide to remove it all including the rails you may as well do a Rickter...

Also, yes to the pink foam. I would add small drain plugs in the back as well and test them for water tight before sealing everything back up. If you decide on adding a foot strap or two, I can give details on how I did mine. I'm not a fan of footholds, I prefer surf stance with straps. The way...

Good idea. My brother and I defoamed ours this past winter. Filled the trays with water after 5200'ing everything. It took mine 3 different times of filling with water/emptying and drying everything off and redoing 5200 to finally stop all the leaks. You would be surprised how easy water can...

Looks awesome!! Thanks Chris, can't wait to try it out!!

One other thing. How many turns out should the low speed adjuster be turned out from closed?

Ill check the plug wires, I may just order new ones and replace the old ones all together. I just remembered reading on the Mikuni PDF that 3 turns out is the stock setting on the high flow knob from the factory. Mine was roughly at 2.5 and i turned it to 3. I only have a single carb on my...

So no more than 2 turns on the high speed adjuster? It idles fine in and out of the water. It even revs up fine out of the water. I still a complete noob at this carb/engine stuff. I am not sure what you mean by re jet bigger or jetted up. I am not sure jets are in the carb. I would just...

I have a 93 kawa 750 sx, with a decent amount of aftermarket parts on it. I bought it already modded. When I originally purchased the ski, I dropped it in the water last summer and for some reason it would not go faster than 5 mph. Out of the water hooked up the hose it sounded great. I took...

Thank you Billman! How do you get to the screws that hold on the tray pads? If I order the Hydro Turf side pad rail cover kit (http://compare.ebay.com/like/150951483462?var=lv&ltyp=AllFixedPriceItemTypes&var=sbar), would these go right over the factory purple ones or would i need to remove...

How do you remove the stock chin pad from the ski? I read there are 4 bolts underneath the hand-pole holding it on but i cant seem to locate them. Also, how do you remove the stock purple side pads? Do they just pop off? I cant seem to find anything on the net that explains this very well.