61x

Excellent condition OEM 2008 Superjet cylinder. 1 season of use before it was pulled for swap with ported cylinder setup. Kept it around as a back up just in case. 300$ or reasonable offer

As title. Cutting the outlet and re-welding it 180 degrees out should give you a nice ~18hp boost on a stock 701, from what I've read. Please do some reading on the modifications you need to make to this to run it on a superjet before buying. Includes the aluminium head bracket and all...

So, I picked up a rough WDK ROK hull last week and started to put it together. She needs paint bad but I want to hit the water first to see what I think and then paint it over the winter. I still have my superjet to ride so she might hit the water for a few weeks, feel out what I like about the...

Yamaha 62T/61X Drop-In Setup - 62T cases, 61X cylinder - ADA girdled head - V Force 3 Reeds - MSD Enhancer - MSD coil - 0.5mm over pistons - Blowsion flame arrestors with adaptors - Factory B pipe with T-handle screws - 185/185 psi compression Motor was fogged and winterized at the...

I’ve got my 95’ blaster torn apart right now and trying to get it ready for the summer. I got a few questions about boring the engine and re-jetting, etc. I’ll let you know what I’m running and the whole setup I have so you have a better idea of what I’m working with. -61X bottom and top end...

WTB Oem 61x reduction nozzle. Not bored. Would also consider an old cast ProTec 61x reduction nozzle. Need ASAP

Hi All! I'm looking to find a Factory Pipe Head Pipe to replace my current cracked one :( I have the Factory manifold and Mod pipe already. Just hoping to find the head pipe and get back on the water, without having to wait for a back order. Thanks!

I have a misc list of used parts for sale. All items will have an added cost for shipping based on buyers location and calculated using UPS standard shipping. - waveblaster waterbox. No leaks $50 - 61x 6m6 exhaust mani $50 -( 2) 62t cylinder blocks. The one with mani attached is at 81mm, bone...

Im looking to buy a ported 61x cylinder but will be fine with a stocker. Pm me with what you got.

Looking for a Jetinetics flywheel, or another lightened flywheel for my 95' blaster. Let me know what you have with pictures, if you can.

As title says I'm getting low compression in both cylinders around 120 psi in my 61x engine . Is replacing Rings and Pistons my best bet? Any upgrades I might as well do during a rebuild?

Bad bones 44 mm intake manifold with dual pulse line. I am not on the internet much best way to reach me is the phone number below $199 Will ship anywhere in the lower 48 for $20 Questions read right to left call or text 2463/318/616

$300 shipped Set for dual cooling Threads coiled Freshly beadblasted and painted

At the end of last season I picked up a 93 SN superjet with a 61x in it. (I put about 6 tanks of gas through it without any problems or overheating that I know of.) From what I have researched no other skis cooling seems to be similar (all go from pump to exhuast) and I just want to make sure it...

So I thought a 62t 62t was a 760, but it's a 701? I really am not sure if I want to do a 62t 61x combo in my squarenose yet or not. It's either that or a 760. Can someone give me the correct combos? Also is the 760 really as bad as everyone says it is?

Was gonna put a RAD 61x lightened flywheel on 701 61x motor was wondering if you had to retard the timing for the it or not

Hi everyone! I'm throwing the blaster back together and figured it is time to replace the grate. I have a two bar setup now. My ski is making a little more power than stock. It's a 61x with West coast wet jet intake and head. Im set up for around 180. 46mm wetjet mikuni carb. Ocean Pro...

I have three parts for sale that would be a great addition to your Superjet. WILL SELL ALL AS A PACKAGE FOR $ 275 shipped. 1. Mikuni dual 44 mm carbs. No rust, primer only (no choke plates). $ 135 shipped 2. Pro Tec dual intake manifold for 44 mm carbs. Comes with reed cages. $150 shipped 3...