750 sxi

  1. MX952

    750 SXi W/Coffmans Pipe

    I just picked up a 750 SXi that has a Coffman's pipe that has the small stinger/silencer in place of a water box. One of the previous owners stuck a bolt and what looks to be a piece of rubber belting in the mount at the exhaust manifold and it has no other mounting points or straps holding it...
  2. Iowa750sxi

    SX/SXi/SXi Pro 750 sxi little/no spark - Must be stator...?

    ‘95 750 sxi stopped running mid-season last year and when I finally dug into it this year I found that I had no visible spark across the spark plug and minimal lighting of the bulb in the inline spark tester. I tore into the e-box and discovered that it had standing water inside. Cleaned it...
  3. Mxer78

    SX/SXi/SXi Pro 750 sxi problems

    Hey guys, Ive been having a problem that I cannot figure out with my 96 750 sxi. All of a sudden the ski started not running right in the water. I can start the ski on the stand and it runs great. I've hooked water up to it and it runs fine. But when I put it in the water under a load, it bogs...
  4. Ryan Stewart

    First Build. Kawasaki 750sxi

    Bought a kawasaki 750sxi. This is my first project ive done. And i was in for a big task, because there was hull hair line fractures, and lots of cosmetic restorations I had to tackle. You'll notice i redesigned the back tray area. I gave it a different shape that would go better with the Toms...
  5. f1r3sh1p

    SX/SXi/SXi Pro Installing impeller KE-CD 9/15 Solas 750 Concord

    The Solas 9/15 impeller that I bought new is up to 1 mm too large in diameter to fit the pump housing. It is advertised to fit my '97 750 SXI (year based on hull id) and I wonder if I should either grind the impeller edges, sandpaper the inside of the pump until it fits or just return it.
Top Bottom