750sxi

  1. ashtonp9

    1996 Kawasaki 750sxi

    Located in Oak Hills, CA. Asking $3500 obo stand included Clean title in hand Never ridden in saltwater or raced. Turf is in good shape 750 Big Pin motor was rebuilt last season Dual Mikuni 40i carbs just rebuilt for the season Blowsion Flame Arrestors & outerwears Bilge Pump on handlebar switch...
  2. S

    SOLD Kawi Skat Trak 142 Magnum Setback 12v Pump w. Solas Trim nozzle $1500 shipped

    SKAT TRAK setback magnum 12 vane pump for the Kawasaki SXR 800, SX / SXI / SXI PRO 750 hulls. 4 hours on it after total rebuild and new powder. Includes a 13/18 prop, setback driveshaft, Solas trim nozzle assembly (NIB, Skat drop nozzle shown but not included), trim cable, and Blowsion lever...
  3. FLiPSyDe71

    ISO misc 750 parts

    Had a spare 750 motor kicking around from SS Xi and came across a SX hull I just picked up this weekend. I'm missing a few things and wondering if anyone had these parts: - Exhaust headpipe (elbow) and muffler (OEM or aftermarket if I can swing it) - Waterbox - Ignition box casing (don't need...
  4. Iowa750sxi

    SX/SXi/SXi Pro 750 sxi little/no spark - Must be stator...?

    ‘95 750 sxi stopped running mid-season last year and when I finally dug into it this year I found that I had no visible spark across the spark plug and minimal lighting of the bulb in the inline spark tester. I tore into the e-box and discovered that it had standing water inside. Cleaned it...
  5. S

    Used Blowsion Kawi 750 freestyle handhold lowered lightweight hood

    This is allegedly Josh Lustic's old hood and the very first one Blowsion made. Allegedly. It's mostly prepped for paint and overall in good shape. It's on ebay for 600, facebook for 475, I'd take 420 shipped here.
  6. Bigbootymike44

    I’m looking for a sxi factory pipe anybody selling one?

    I’m looking for factory b pipe for my 1994 750 sxi pro
  7. nickylaxy

    Slow to Fast (no mid-range)

    Howdy, Have a 95 750SXI - Dual Keihin Carbs - Factory Pipe Got it a few months ago. Rebuild carb and took it to my local shop to have the carb/pipe screws set. They said they set them to what the factory pipe suggested but i'm still having this odd issue to where it will idle and 1/8...
  8. Ryan Stewart

    First Build. Kawasaki 750sxi

    Bought a kawasaki 750sxi. This is my first project ive done. And i was in for a big task, because there was hull hair line fractures, and lots of cosmetic restorations I had to tackle. You'll notice i redesigned the back tray area. I gave it a different shape that would go better with the Toms...
Top Bottom