155 pump prop pitch selection

[DylanS]

I'm switching to a 155 oem pump on my EME 789 and I'm trying to figure out what pitch prop id need for a good bottom end hit

I've heard of guys running 155s in their 701's with bolt ons
Not sure what pitch they were running

 

[myblackz28]

Following.


Sent from my iPhone using Tapatalk

 

[jonolove]

The lowest you can get 6/12 is a good starting point different nozzles bores will be needed to dial it in

 

[DylanS]

The lowest you can get 6/12 is a good starting point different nozzles bores will be needed to dial it in

Do you think it'll make a good difference off the low end though? I have a beefy motor to push it, but I'm hoping to get more low end with the bigger pump
Any opinion on that?

 

[kieran79]

7/14 skat is what I ran on a 760 and 800 Oem 155 pump

 

[scotts2t]

Do you think it'll make a good difference off the low end though? I have a beefy motor to push it, but I'm hoping to get more low end with the bigger pump
Any opinion on that?

Ya a 6/12 and a nozzle bored to 90 would be a good start

 

[Sanoman]

@Big Kahuna or @McDog is there anyway we can combine all these oem 155 pump threads together!?

Be a lot easier to get it all in one place