1993 Yamaha Kaw 1100 Wave Blaster 1 - $4,500 TEXAS

1993 YAMAHA 1100 BLASTER 1 in Excellent Running Condition

93 Yamaha Blaster 1 with Kawasaki 1100 93 Octane Pump Gas Limited Engine. Billet Aluminum Cylinder Head by Cool Head ($350). Compression 125 psi even on all three Cylinders.

Triple Aftermarket Mikuni SBN Racing 44mm Carburetors ($600) mounted on Rhaas Billet Speed Plate ($150) plus Blowsion Tornado Air Forced 1.5” Shorty Flame Arrestors and Adapters ($300).
Carbs have T-Handle Screws for easy Tuning and a Plunger Primer Kit ($50) for easy Starts. Blowsion Throttle Cable Wheel ($25). Oil Pump delete ($25). Pre-Mix at 40:1.

Blowsion Anodized Billet Fuel Tank Pickup with Gas Cap ($180) and Clunk Weight Fuel Pick Up Filters ($20). See-thru Fuel Filters on each Heavy Duty Automotive Grade Fuel Line to Carbs.

Extreem Throttle Engine Conversion Kit ($350) with Rhaas Urethane Motor Mounts and Exhaust ($350) Conversion Kits plus ADA Billet Kawasaki to Blaster Coupler Kit ($100).
Extreem Throttle Rear Outlet Aluminum Exhaust Tube ($100) with Yamaha Wave Raider Waterbox ($75) and Silicone Hose Kit ($100).
Exhaust Chamber Dry Pipe Mod Threadolets for Cooling Water Brass Fittings all professionally TIG welded, not epoxied. Will not leak nor break off. See Threadolet Photos.
Exhaust Manifold milled 1/8 of an inch so it can also fit in SXR and RN SuperJet Hulls.

Electrical Box with Flat Back Plate modification. Yuasa Battery with two seasons.

Single Scoop Intake Grate ($100) and Pro-Tec Ride Plate ($200). Solas Stainless Steel Impeller ($250). Cooling Water Intake Filter. Dual Duckbill Drain System.

Hull, Engine and Ski are in good working condition with original Factory Graphics. Quarter-size Paint Chip on Bow. Normal wear and tear.

Ready to Ride. Blaster does 58+ mph. Clean Title on Hand. $4500. No Trailer. No Trades. Local Pick-Up or Buyer arranges shipping.


71292864008467728421683654915512.jpg76152510855285147691683654915511.jpgIMG_20230509_163756235_HDR.jpg84937796618952499201683654881426.jpgIMG_20230509_163600441.jpgExhasut Welded Chamber Threadolet for Cooling Bypass.jpgExhaust Manifold Cooling Welded Fitting.jpgpays for Shipping.Cooling Inline Water Filter.jpgBlowsion Fuel Tank Triple Pick Up with Clunk Weights 1.jpg
 
Top Bottom