- Location
- McCook Lake, SD
Selling my Rickter XFS (Has XFR tray and bottom deck. Was told they could be ordered this way from factory.) Specs on build: Jet Maniac 781BB (34hrs on total ski build) 33cc domes, compression around 208/210 Jet Maniac remanned starter & bendix 38mm carbs, V-Force reeds, stock intake PFM Industries light weight flywheel, some static advancement on stator plate Light weight couplers PowerFactor lay down pipe with spray bar tapped in manifold MSD Enhancer CDI Rad Dudes 3.8 gallon tank OEM 155mm pump, 6/12 Skat cutback prop 3mm RRP trim with powder coated steering nozzle KVPI Finger throttle New OEM Start/Stop Bilge pump and scupper Absolutely tuned to perfection, it could use a set of plugs, only because they are the original set the motor was broken in with. It has never fouled a pair. Motor was installed, broken in, and tuned with great care. Put some 110/91 mix in the tank, hit the green button and go. Hull is an honest 7 out of 10. Structurally perfect.
