- Location
- vancouver, British Columbia
its been a long hard decision but i think its time to thin the heard for now. i just don't have time to rid one ski let alone two and get it set up.
i was trying to build a Lee stone replica but lack of use this year and no time to tune it properly with short ride seasons on this glacier fed lake in search of the double flip. I feel it would be better in some else hands and if things change ill just build another
I bought this Bun 1200 at last years havasu deal , but with crank shortage it never got installed into the hull till april this year and since then has only had maybe 10 gallons for fuel trough it trying to get the jetting sorted before i finally realized a month ago the MSD brain half fried and the rev limiter kicks in about 4000 rpm just as the power starts. its ripping on the Zeel MS01 setup but after going out today to try and tune it in 34 degree water the jetting is all off again so i give up. time too go.
the goodies
2021 Revolver V2 hull
brand new Bun 1200
SE50's with flame arrestors
aluminum bun pipe and water box
bun 160/ 75mm pump 10/17 prop
Bun trim 102mm
new OEM yamaha starter
new OEM yamaha Bendix
anti gravity battery with quick disconnect
Zeel total loss MS01 ( with hand held programmer) two curves loaded ( can throw in the MSD brain if requested as no use to me) with switch to power off on tray wall
RRP pole with carbon tubes
RRP steering (it has the riser bars for my old ass)
pole lock
hood strap
finger throttle
oem steering cable
new trim cable
new drive shaft
new couplers motor and mid shaft
new rubber coupler
oem yamaha mid shaft bearing and housing
custom ride plate mounted, also have the short ride plate
currently has the go kart white tank installed , i have a new Thrust 2 gal tank but never got around to making mounts to install it so your choice of tanks
if it doesn't sell in a few weeks when the snow hits, ill winterize it and put into storage till spring and might keep or try to sell again
i can cross the boarder and ship from seattle if this makes it easier or possible road trip if not too far away
Looking to get $36K USD plus shipping costs
i was trying to build a Lee stone replica but lack of use this year and no time to tune it properly with short ride seasons on this glacier fed lake in search of the double flip. I feel it would be better in some else hands and if things change ill just build another
I bought this Bun 1200 at last years havasu deal , but with crank shortage it never got installed into the hull till april this year and since then has only had maybe 10 gallons for fuel trough it trying to get the jetting sorted before i finally realized a month ago the MSD brain half fried and the rev limiter kicks in about 4000 rpm just as the power starts. its ripping on the Zeel MS01 setup but after going out today to try and tune it in 34 degree water the jetting is all off again so i give up. time too go.
the goodies
2021 Revolver V2 hull
brand new Bun 1200
SE50's with flame arrestors
aluminum bun pipe and water box
bun 160/ 75mm pump 10/17 prop
Bun trim 102mm
new OEM yamaha starter
new OEM yamaha Bendix
anti gravity battery with quick disconnect
Zeel total loss MS01 ( with hand held programmer) two curves loaded ( can throw in the MSD brain if requested as no use to me) with switch to power off on tray wall
RRP pole with carbon tubes
RRP steering (it has the riser bars for my old ass)
pole lock
hood strap
finger throttle
oem steering cable
new trim cable
new drive shaft
new couplers motor and mid shaft
new rubber coupler
oem yamaha mid shaft bearing and housing
custom ride plate mounted, also have the short ride plate
currently has the go kart white tank installed , i have a new Thrust 2 gal tank but never got around to making mounts to install it so your choice of tanks
if it doesn't sell in a few weeks when the snow hits, ill winterize it and put into storage till spring and might keep or try to sell again
i can cross the boarder and ship from seattle if this makes it easier or possible road trip if not too far away
Looking to get $36K USD plus shipping costs
