62t exhaust mani on a 61x?

[codyadams209]

Hey guys I am changing from my 760 to a 701 with x scream 771 and it has a 61x cylinder so I need to run my b pipe mani on that engine, don't people use little metal sleeves in the 4 corners to line it up and then use the smaller bolts? Help me out

 

[Harbor]

A 8x1.25 heli coil is 10.06 O.D. I think I saw that threaded up the bolt as the sleeve

 

[codyadams209]

A 8x1.25 heli coil is 10.06 O.D. I think I saw that threaded up the bolt as the sleeve

Hmm that's interesting

 

[augustaf]

I have used 5/16" (brass) ferrules in each 62T x-manifold hole, works good, lasts a long time.

 

[codyadams209]

@augustaf Ok I will check the local hardware store tomorrow, I just needed to know the size

 

[augustaf]

Search for: 5/16 brass compression sleeve. Local price $1 each. As low as 12 cent each in quantity. The following link will show you what they look like: http://www.ebay.com/itm/GAR-60CS5-5...ece-/331080224445?hash=item4d15eb4ebd&vxp=mtr

 

[CARBONX2]

I used clear hose over bolt, 8mm ID - 10mm OD. Cheap and easy