650 -94 spark problem

[FloatR]

So here we go again, another spark problem. I've replaced almost every detail in the electric box, CDI, Ignition Coil, Starter Relay....and the Damn thing still won't spark.

Changed the start/stop switch.

I've re-solded the wires from the coils on the flywheel because many of them were bad.

I get good readings from every coil except the charging coil. It should say around 360 ohm but I get 14,80 mOhm.

Could this be the problem? I've never experienced it before....

 

[Bobert540]

Have you tried a good working stator?

 

[FloatR]

Have you tried a good working stator?

Nope, that's the only thing left. But in order to test the stator I need to remove one from a healthy ski, and that's not on the top five list

But I guess it just needs to be done in order to exclude it from the list.

 

[augustaf]

The charge coil charges the capacitors in the CDI- that's where the spark comes from. Your charge coil seems to be open, You could solder in a new or used one. Here in the US, 61X stators (I assume that's what you have, since you mentioned 360 ohm) go for about $50 on Ebay, used.