701 61X blaster jetting questions, Help the dummy?

[sea-dude]

I have 2 blasters and have carb setting questions on both.

1.Bone stock with primmer kit, need stock screw settings for highs and lows.


2.Stock with Factory limited Pipe, Primmer Kit, Premix, Ocean Pro FA with outerwear’s. Need recommended jet size and screw settings.
Should I run the stock air box or is the Ocean pro ok? boat is for surf only


Thanks in advance:hail: , I have just started messing with carbs and don’t want to F it up.

 

[Mike W]

Based off your sig I'm assuming single carb 61X. Here is the jetting I have for mine which is stock other than a B pipe and primer kit:
145 Main
120 Pilot
2.3 N/S
95 gram spring

1 1/2 turn on the high
1 1/4 turn on the low

I run a OP F/A as well with no injestion issues. If you have a stock F/A i would run it.

 

[sea-dude]

Based off your sig I'm assuming single carb 61X. Here is the jetting I have for mine which is stock other than a B pipe and primer kit:
145 Main
120 Pilot
2.3 N/S
95 gram spring

1 1/2 turn on the high
1 1/4 turn on the low

I run a OP F/A as well with no injestion issues. If you have a stock F/A i would run it.

Yes they are both single carb, I already have the Ocean Pro (on the bench), now I just can't decide if the gain is worth it.

Thanks for the input.