650/X-2 750 X2 conversion help

[andy49510]

Could someone tell me everything i would need and what would need to be done to do this? I've searched around and I can't really find any good threads on it.

Thanks for any help in advance!

 

[kevbo]

Basically all you need is a 750 engine. Keep searching for information on details, people have been doing this mod since 1992.

 

[Vumad]

You need a 750 engine, the exhaust you want to use, exhaust hoses as needed, a fuel tank that fits (the stock tank fits unless you change things), a place to mount the electronics, a different impeller, ummm...

I am running a 750 engine, westcoast exhaust manifold from a 650 (has a different angle than the FPP manifold so it fits), FPP headpipe, SJ B-pipe chamber, SJ RN stock waterbox, Blaster exhaust outlet (ou the engine compartment side), misc hoses for the exhuast routing, a Kawi 550 fuel tank (going to change the tank), a few screws to mount the e-box to the stock water/fuel seperater and behind the fuel cover.

Everything else is from the 650.

 

[andy49510]

A new impeller would actually be required or just recommended? I'll probably end up putting a new one on the X2 anyways but just wondering.

 

[snowxr]

Prop required? no, but it won't run nearly as good as it could.

The sky is the limit with X2's. Your only limitations are your skills and imagination.