- Location
- Jackson mi
- Should I buy a 1996 760 wave rider for 850, or just keep my 2003 sj 701 62t engine?
760 wave rider engine
- Thread starter BEastman
- Start date
Keep your 701. Spend the 850 towards a hpe stroker kit from @holeshot
www.x-h2o.com/index.php?threads/hpe-4mil-bolt-in-stroker-kit.174406/
www.x-h2o.com/index.php?threads/hpe-4mil-bolt-in-stroker-kit.174406/
- Location
- Jackson mi
Thanks I will do that !!
bored&stroked
Urban redneck
- Location
- AZ
My plan as well. If you want a 760 just bore your current cylinder to 84mm.
There must be more to it then that? I just bored my jet maniac 718 from 82mm to 83mm and it brought it from 718cc to 735cc. You need to replace the cylinders to be able to bore to a 760 I believe ?
Sent from my SM-G928W8 using Tapatalk
You can bore the 61x to 84mm for 760cc.
Big Kahuna
Administrator
- Location
- Tuscaloosa, AL
754cc @ 84. Walls are thin
Sent from my SAMSUNG-SM-G930A using Tapatalk
Sent from my SAMSUNG-SM-G930A using Tapatalk
- Location
- Jackson mi
I have a 760 cylinder I was just looking at my options my plan is to have jetmaniac bore it out to 771 for a winter project.
bored&stroked
Urban redneck
- Location
- AZ
Even GroupK will bore up to 84.5mm on a lower compression 61x casting, and they are the kings of conservative. Not sure how much over 84mm I'd go myself, cause I like compression.
Big Kahuna
Administrator
- Location
- Tuscaloosa, AL
Friend had a 61x bored to 85mm. Skirt was paper thin. No 9dea how it lasted so long.
Sent from my SAMSUNG-SM-G930A using Tapatalk
Sent from my SAMSUNG-SM-G930A using Tapatalk
Half flip95
Formerly pondracer95
- Location
- Lake Havasu City AZ
Skip the stroker and put the 850 in your saving account.