Super Jet adhesive from stickers

[runninAmuck]

does anybody know how to get the adhesive from stickers off ? i just took off my stock or what was left of my stick graphics off my sj and the sticky part is still on there. ive tried wd 40 and scraping but it doesnt seem to come off as easy. does anybody have a trick to getting it off ?

 

[JPCharmin]

goo gone

 

[runninAmuck]

does that really work, ive heard people say it doesnt work or sometimes it takes off the paint as well

 

[1fastsedan]

ive done this a few ways. lots of windex and and flexible putty knife. or acetone/ paint thinner. are you pulling the graphics off your 650sx? I helped my buddy with his and it was a pain. after we used acetone we used a buffing wheel and car wax to bring it to a shine.

 

[Peter]

X2 on the Acetone. I use a heat gun first and peal back the stickers. Then Acetone to clean the rest of the glue off.

 

[runninAmuck]

no i dont have the 650sx anymore. sold it a couple years back and bought my 01 sj. windex you say ? i tried wd 40 and a scrapper but it took forever to get half of it off. i tried using some rubbing compound too

 

[runninAmuck]

ya i was out there last night with the gfs blow dryer taking the sticker off but i guess it wasnt hot enough. where can i get some acetone ?

 

[burton148]

Brake cleaner.

 

[1fastsedan]

acetone you can get at any hardware shop or home depot. i used windex to take the adhesive off left over from the cf numbers. acetone and a clean rag will do the trick.

 

[runninAmuck]

okay cool thanks guys

 

[JETSKIHORDER18]

Brake cleaner or acetone, plastic putty knife of a sharp razor blade.

 

[Joker]

Go buy a can of aircraft decal remover. Blue and black can.

 

[Cannibal]

Those eraser wheels that you can buy in the auto body section of most parts stores work great. The 3M ones work even better, but you usually need to get them from auto body stores, not Napa or O'Reiley.

 

[MikeyB]

Those eraser wheels that you can buy in the auto body section of most parts stores work great. The 3M ones work even better, but you usually need to get them from auto body stores, not Napa or O'Reiley.

I agree, the eraser wheels work great. Goo-gone or adhesive remover also works, but the eraser wheels will take off the toughest stuff without damaging the paint.

 

[EvanKrefski]

Just ude your thumb nail.... no brush or anything

scratch while goo gone is on it, then take a rag and rub off all the extra scrapped off glew, then repeat

 

[Armored snuffy]

Goo gone is weak. Don't like it at all. Goof off is the brand to get. Lowes has it. I'm sure acetone would work as well.

 

[Stubs81]

I just did this to my ski and tried everything. Ended up using a eraser wheel and some 3m adhesive remover and a straight razor blade where there was some adhesive left at the edges of all the stickers. Just takes time and is a pain

 

[SXIPro]

Rapid Remover

 

[Brett8686]

3m adhesive remover with bondo scrapper works good

 

[SuperSteve]

i got mine off with acetone and goo gone.. neither one did a very good job. about an hour on each side just to remove the adhesive. if i had to do it again, brake cleaner, eraser wheel or the aircraft adhesive remover.