Blaster Blaster 3 - mods for wave jumps?

[davidescu_radu]

Hi!
I'm from Romania and i have an europeen wb3 with 800pv engine and 155 pump.

I need any advice to make it have more low end power and sharp response.

My ideea was to buy a magnum pump and a different impeller but don't know what type/brand ?

Thank's

 

[WB800BLASTER]

i run a 144 mag pump with a 14/19 and mine is a 2000 model. leave it stock as the 800 is bitch if it blows

 

[davidescu_radu]

So your stock pump for wb800 is 144!??
I thought 155 is standard.I need more low end - what to do?

 

[701dave]

Get rid of it. Any b1,s over there.

 

[scottie mac]

Stock pump on the B3 is a 144, same as the pump in the blaster 1. The b2 has the larger pump.

SM

 

[High Speed Industries]

Put a 1200 in it. It bolts right in to the factory mounts. I have a 1200 b3 in my storage unit if you want to see a picture.

 

[BrettCKosh]

Saw some pics of a b3 on pwctoday...they actually look really cool. A little bit more couch than the b1, but nice looking none the less.

 

[irishblaster]

I've owned one,big boat compaired to b1, very stable ,excellant for storm riding and BIG air and launching through the air!

 

[irishblaster]

[FONT=.HelveticaNeueUI]http://m.youtube.com/watch?v=A2oDzDVA0x4[/FONT]

 

[Wb800]

Put a 1200 in it. It bolts right in to the factory mounts. I have a 1200 b3 in my storage unit if you want to see a picture.

Yes please very interest end

 

[CARBONX2]

Skim step off head, fit 48mm carbs, Hooker impeller and scoopgrate are all you need. 150hp, a few more tweaks and you can have 160hp.