I am about to make a trip out to OK to buy a couple of superjets. Its a great buy and I was just curious about what I should look out for. Also he told me that one of them has wet foam, what does that entail? Final there is an issue with a seal that causes a leak by the exhaust manifold any advice?
buying 2 superjets please help
- Thread starter cuneoj
- Start date
I would advise you use the search function on wet foam.
It means the floatation foam in the back is waterlogged and the ski is heavy.
Ride it as is, or cut it open, defoam, refoam, glass it back up, put new mats on it.
As for the exhaust, stock exhausts can be had for next to nothing.
It means the floatation foam in the back is waterlogged and the ski is heavy.
Ride it as is, or cut it open, defoam, refoam, glass it back up, put new mats on it.
As for the exhaust, stock exhausts can be had for next to nothing.
vjhardcore
Ride It Like Ya Stole IT!
- Location
- Toronto, Canada
Stock Exhaust...
Congrates with the new purchases. The whole new foaming thing seems like a pain - but with the help of the X - you shouldn't have too many problems you can't sort out.
As for the Pipe. I have a brand new complete exhaust system from an 07 SJ. Never used as it was taken off my ski before it was fired up. PM me and let me know if your interested.:fing02:
Congrates with the new purchases. The whole new foaming thing seems like a pain - but with the help of the X - you shouldn't have too many problems you can't sort out.
As for the Pipe. I have a brand new complete exhaust system from an 07 SJ. Never used as it was taken off my ski before it was fired up. PM me and let me know if your interested.:fing02:
wayne
wannaroll
- Location
- Mesquite, Texas
stock exhaust are a plenty. i think i have 4 or 5 for 650 's and 701's.
i just did a build up on my sq. cut out the entire foot tray bottom and sides. defoamed, pulled all tubes except drive shaft tube. re installed all tubes and sealed them up.
put in footholds if you are going to refoam. the defoaming sucks, glassing sucks, refoaming not as bad as i thought it would be. it is not hard just time consuming. kawtipper and i did ours together and it wasn't too hard at all. a little patience goes a long way.
i just did a build up on my sq. cut out the entire foot tray bottom and sides. defoamed, pulled all tubes except drive shaft tube. re installed all tubes and sealed them up.
put in footholds if you are going to refoam. the defoaming sucks, glassing sucks, refoaming not as bad as i thought it would be. it is not hard just time consuming. kawtipper and i did ours together and it wasn't too hard at all. a little patience goes a long way.