choosing an impeller??

[Steven Domey]

2014 carbon brawler
701, 62t, tnt laydown pipe, 144mm oem pump
i need a prop
what pitch and brand
any insight would be appreciated

 

[KMN]

Hooker 9/16.

 

[Roseand]

Spend 300$ and get a 144 Solas stator and the right prop at the same time.. You'll be thanking yourself.
Between 9/15-10/16 impros hooker.
Or between 11/17 - 12/18 skat swirl. I prefer skat swirl in mag pumps. If you go with the mag I would definitely try the lower pitch first. Is it a 62t cylinder? 62t cylinder would benefit from the lower pitch as well.

 

[Steven Domey]

thank you, i will look into a stator at the same time and see what i can match up!

 

[TheBuzzard]

Mag pump is not going to give you any additional thrust so if are riding the ski as a rec boat, it aids in directional stability at higher speeds. Doesn't add power. A lot of old straight blade props are excellent but I can't tell you what one you need. That's why everybody says expensive hooker prop, cause they don't know either

 

[kevbo]

You can use a large hub impeller on the stock stator if you want. Adding a "mag" stator does not help as much as the prop. I have a 9-15 Solas YQ ,"large hub". It would need to be pitched down for best response although a low port big bore may be able to pull it. A larger nozzle will make more thrust as well. Whatever you end up with pay attention how quickly the pipe responds. If its a little too slow then repitch the impeller down a little.

 

[Big Kahuna]

Mag pump is not going to give you any additional thrust so if are riding the ski as a rec boat, it aids in directional stability at higher speeds. Doesn't add power. A lot of old straight blade props are excellent but I can't tell you what one you need. That's why everybody says expensive hooker prop, cause they don't know either

Well, there is not much option now honestly........... No more Skat.......... Hooker or Solas. I would suggest Hooker as well.

 

[FullNelson_69]

Ive got a tuned up 760 with a carbon RRP chamber and a 155 pump in a LSP Revolver. Just bought it unsure of what pitch it is. Looks to be a skat prop though. It seems to be fast. Im looking for more punch on the low side. Any suggestions for this set up?

 

[kevbo]

Flatten the impeller until it responds quick enough.