Other Converting a bpipe!?

[Sanoman]

Just wondering if anyone has ever cut up a mod bpipe for a superjet and made it into a limited chamber? Seems to be several mod pipes for sale and no limited's available.

So,
Waste of time?
Cannot be done?
Will fall apart?
Not feasible?
And of course,what were you thinking!?

Let me know your thoughts and discuss please

 

[BruceSki]

All that work for a chamber that is difficult to notice the difference between?

Then you get rid of the ease of installation of a mod chamber also?

 

[Yami-Rider]

Dont do it.

I prefer mod chamber, easier to install.

 

[Freakrider]

All that work for a chamber that is difficult to notice the difference between?

Then you get rid of the ease of installation of a mod chamber also?

True on both accounts but when I switched from a mod to a limited on a XS 735 I noticed it got on the pipe a bit sooner and every piece of the puzzle adds up especially bored nozzle more than lightened flywheel imo.

 

[eastcoastjumper]

I can see cutting a limited to shorten it into a mod pipe, but how are you going to get the material to lengthen a mod pipe?

 

[Sanoman]

I can see cutting a limited to shorten it into a mod pipe, but how are you going to get the material to lengthen a mod pipe?

you caught that......

 

[txsuperjetfreak96]

Unless you got some material had it rolled to size then slip it on and weld it, it would look stupid but probably work

 

[BruceSki]

Like I said...tons of work for a barely noticeable difference. I've tried them back to back.

Ease of installation wins over the slight gain in bottom end with the longer chamber.

 

[eastcoastjumper]

I have a couple limited pipes. Do you wanna trade one before I try chopping mine up?

Or maybe I can send you my cutoff section of pipe and you can try welding that in lol

 

[Crab]

True on both accounts but when I switched from a mod to a limited on a XS 735 I noticed it got on the pipe a bit sooner and every piece of the puzzle adds up especially bored nozzle more than lightened flywheel imo.

Amen

 

[j0hnny]

cut in half. roll a bead. use coupler to tune length u want....

 

[air blair]

you caught that......

Chamber stretching device!!! I'll be JetManiac sells em. Mod & limited is all the same to me other than a longer 45* hose


Sent from my iPhone using Tapatalk

 

[speedysprocket]

cut in half. roll a bead. use coupler to tune length u want....

There's a vertical vane inside the chamber that runs most of the length, so you can't just cut it in the middle. Would have to be at the end. And too much work!

 

[j0hnny]

interesting. never seen inside a FP chamber. only my 650 and coffman chambers

 

[SpaceCowboy]

If someone wants to give me one I'll X-ray it


Sent from my iPhone using Tapatalk