Blaster Disconnecting Tether switch thingy

[redblaster007]

So I had one of the little springs break in the tether holder up thing in the start stop handlebar box and wanted to see if I could disconnect the tether switch just to get by for the weekend. How do I do this? All help appreciated. Ski is 95 yam blaster

 

[munki63]

just use a zip-tie

 

[WFO Speedracer]

No real way to do this, disconnect the stop portion of the switch at the quick connector, its the black and white wires, turn your idle down so it won't idle,go ride

 

[redblaster007]

Darn , I figured it might not be possible. Monki63- the problems not the tether itself but internal electrically in the start stop.

 

[munki63]

or you could zip tie it....and not risk breaking the clips... or filling them with oil/water bla bla... and its easier.... turning down idle is a fantastic idea also

 

[munki63]

which spring are you speaking of? I must be thinking of the wrong one then, if its the other lil springs use a spring from a clicky pen

 

[redblaster007]

It is one of the littler ones that allows for there to be contact to the copper, I was able rig somethin up in there for now to make it work, thanks guys