Factory Pipe coupler needed ASAP

[DaUpJetSkier]

I need a rubber coupler for a factory dry pipe, its got to be 3 3/4 inside diam by 2 1/4 inches. If ya got one lemme know, need it by this saturday preferably.

 

[PWW]

You may want to try a truck (18 wheeler) parts supply places. They are similar to what they use for connecting the turbo intercooler. You may want to take yours so that they can match the diameter.

Just checked and a B-pipe is a 4" dia. coupling. fyi, I use a Goodyear intercooler coulping P/N 57503 to get 2 pieces of a 4" dia coupling.

 

[DaUpJetSkier]

thats what I was going to check tomorrow, its actually for a buddy of mine, im also gonna check the repair shop for CASE trucks around here. Its not for a b pipe tho, its the riva factory pipe i forget which one but its huge and mounts to part of the head with two bolts.

 

[Mark44]

McMaster Carr has the silicone hose that Factory uses #5296K47 I purchased a 1' piece from them. Just call and tell them you only want a 1'.

Mark44

 

[DaUpJetSkier]

thanks I just placed an order, nice place to deal with. It will get to my house by tomorrow. so 3 3/4 inside diam and 4 1/8 outside it right?

 

[tricky1]

Factory dry pipe takes 3.5" ID x 2.25"

 

[Mark44]

d

thanks I just placed an order, nice place to deal with. It will get to my house by tomorrow. so 3 3/4 inside diam and 4 1/8 outside it right?

Yes McMaster Carr ROCKS. We order probably 3 -15 times a day from them and we always get everything the next day. It is very rare when something doesn't show the next day.:biggthumpup:

You will now have enough hose for quite a few couplers. I carry a spare for me or someone in need. :woot:

Mark44

 

[Proformance1]

I just ordered a spare from FP on Tuesday from them and I got here on Thurs. I was 18 bucks I think, so that is kind of pricy but I was ordering spare gaskets anyway. They can next day, but it is probably pretty expensive.

 

[32vickie]

i have a Factory Pipe for a JS550 that Factory pipe says is a 4" 3 ply silicone hose. Could i use the Goodyear part number for this?

Doug

 

[AdamOntario]

http://www.x-h2o.com/threads/36902

 

[32vickie]

but is the coupler that factory pipe is calling a 4" 3 ply silicone coupler a 4" id or a 3.5" (trickey1) or a 3-3/4 diameter (DaUpJetSkier). i think they would standardise the couplers.
Doug

 

[32vickie]

bump
?
anyone

 

[RabbitX29]

Call Factory Pipe. I just had to yesterday for the same thing. Explain your pipe and they will tell you the right diameters.

Factory Pipe (707) 463-1322

 

[Mark44]

t

Ummm measure the pipe.

Mark44