For those who doubt me inspired by Ronnymac)

[Superjet3]

OK, this thread is not being created to bash any companies. I am simply posting this because my honesty and integrity has been questioned. I am not one to make ******** up nor have someone pay me with jet ski parts to bad mouth another company. I am honest and straight up. Attached are pictures of my receipts from the +5mm Lamey cyl I bought. When I finally received the cyl i had just purchased a house so I sold it to Nikad58 (Butch). The cyl was then shipped back to LPW. Butch eventually sold the cyl to another person who I cannot recall. I was since contacted by that person because the cyl was setup for std stroke, NOT +5mm! On the receipt you can also see the charge for the brass bushing and labor for machining it out. In the picture you can see the material missing from the top left which caused the bushing to fail.

 

[Superjet3]

Dave’s empty hull (soon to be built again thanks to many generous people here!)

 

[Mouthfulloflake]

dont we have a feedback forum?

 

[Superjet3]

This is not feedback on a company or seller.

 

[GIL]

ATTENTION BIG KAHUNA-NOTHING WAS SAID ABOUT POST DUMPING IN STEVE'S THREAD OR SUPERSLUGS THREAD-SO I DO NOT WANNA HEAR ANYTHING ABOUT THIS!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

I am sooooooooooo ready for spring! So-is anyone else stoked about Steve's new LPW fortified 07SJ?

Has anyone heard the rumor about Barbara havin a top end monster TRICKY motor in yer 05SJ?

 

[Big Kahuna]

Ronny, Ihop, you two are having issues with each other........take it to PM's, Email, Phone or go out side and kick each others ass, but take this crap somewhere else........

IHOP. you post only makes half sense, if you are going somewhere with it, make it something the average person can comprehend.........

this crap is getting old.

 

[Superjet3]

ATTENTION BIG KAHUNA-NOTHING WAS SAID ABOUT POST DUMPING IN STEVE'S THREAD OR SUPERSLUGS THREAD-SO I DO NOT WANNA HEAR ANYTHING ABOUT THIS!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

I am sooooooooooo ready for spring! So-is anyone else stoked about Steve's new LPW fortified 07SJ?

Has anyone heard the rumor about Barbara havin a top end monster TRICKY motor in yer 05SJ?

Who is Steve? I am stoked for him. Hope he has great luck with his boat!

 

[Superjet3]

Ronny, Ihop, you two are having issues with each other........take it to PM's, Email, Phone or go out side and kick each others ass, but take this crap somewhere else........

IHOP. you post only makes half sense, if you are going somewhere with it, make it something the average person can comprehend.........

this crap is getting old.

What dont you understand? I would be more than happy to clarify. Ronny said I was making stuff up to get cheap parts from 24-7. I think Ronnymac is the one with the problem. He has been calling me out.

 

[GIL]

Who is Steve? I am stoked for him. Hope he has great luck with his boat!

Steve is yz250fpilot-he bought my old LPW701 motor that has been a good one. He rode my ski w/that motor in it last summer and he really liked it-still mild enuf to be real reliable yet alot more than stk porting.

 

[Kennay]

Ronny, Ihop, you two are having issues with each other........take it to PM's, Email, Phone or go out side and kick each others ass, but take this crap somewhere else........

IHOP. you post only makes half sense, if you are going somewhere with it, make it something the average person can comprehend.........

this crap is getting old.

I vote for the ass kicking, as long as someone is filming it in a well lit area.

 

[Big Kahuna]

I was referring to the discription of cylinders and work done, kinda of runs together........

 

[RonnyMac]

this crap is getting old.

Beyond old!
I-Hop started this thread with my name in the title. Dont blame me!

 

[bad93blaster]

pat bought the cylinder from butch (wb800blaster or suncor stainless)

 

[SXIPro]

I'm telling !!!! My Dad could beat up your Dad.

I'm rubber you're glue.

Sound familiar.

Jesus Christ. Knock it off. Grow up. Go Ride, go listen to music, go eat, go get laid.....

For God's sake enough is enough.

This place used to be fun. Recently it has pretty much sucked because everytime the rest of us log in all there are are posts by a bunch of whiny bitches on the rag that just can't let go or get over a grudge.

I apologize in advance to the ladies on the board for my last comment, as it was aimed soley at y'all know who(s).

Oh, and where is the Who Gives a F*ck option on your poll?

 

[Wolf Child]

I'm telling !!!! My Dad could beat up your Dad.

I'm rubber you're glue.

Sound familiar.

Jesus Christ. Knock it off. Grow up. Go Ride, go listen to music, go eat, go get laid.....

For God's sake enough is enough.

This place used to be fun. Recently it has pretty much sucked because everytime the rest of us log in all there are are posts by a bunch of whiny bitches on the rag that just can't let go or get over a grudge.

I apologize in advance to the ladies on the board for my last comment, as it was aimed soley at y'all know who(s).

it's winter.. a little sun and surf will make everyone all beter again

 

[Boris]

go listen to music,

Kashmir is playing on XM LED right now.

 

[Moondance]

I'm telling !!!! My Dad could beat up your Dad.

I'm rubber you're glue.

Sound familiar.

Jesus Christ. Knock it off. Grow up. Go Ride, go listen to music, go eat, go get laid.....

For God's sake enough is enough.

This place used to be fun. Recently it has pretty much sucked because everytime the rest of us log in all there are are posts by a bunch of whiny bitches on the rag that just can't let go or get over a grudge.

I apologize in advance to the ladies on the board for my last comment, as it was aimed soley at y'all know who(s).

Oh, and where is the Who Gives a F*ck option on your poll?

No offense taken. But I prefer the term "dragging string":439:

 

[Superjet3]

I was referring to the discription of cylinders and work done, kinda of runs together........

OK, I put my $2k deposit down for the Lamey cyl back in 3/06. I was told if he got the money up front he could get me the cyl faster. So in hopes for having it for Lanier that year I gave him the $$$. Well months went by as well as various excuses such as Lamey was really backed up, Lamey said it shipped, ect. I finally gave up and asked for a refund, but was unable to get it. So I waited, and waited and I finally got my cyl some time in 11/06. As disgusted as I was on the wait I decided to sell my cyl and put the money into my house. Butch bought the cyl from me and had me send it back to Paul so he could build him a motor. Months went buy and Butch never built the motor and Butch decided to sell the cyl. I had to supply butch my receipt when Paul tried telling him he never sold me domes for the motor. wb800blaster then purchased the cyl from Butch (Cyl was still at LPW) I got an e-mail from wb800blaster asking me if the cyl was supposed to be set up for a +5mm motor because the cyl he got was std stroke. Hope that is clearer for you.

 

[Idok]

pat bought the cylinder from butch (wb800blaster or suncor stainless)

youre avatar NEVER gets old.

please do not ever change it, and post more if possible




:mischievous:

 

[Mouthfulloflake]

great, so you were unhappy with your dealings with Jr Magoos.

we have heard your story.

Now please, lets move on.