Found nice Factory B headpipe bolts.

Yami-Rider

TigerCraft FV-PRO
Location
Texoma
Like this:
http://www.probolt-usa.com/stainles...eel-flanged-hex-m10-x-1-25mm-x-45mm-fine.html

Or, go cheaper:
Serrated flange: http://www.mcmaster.com/#92820a550/=qvfojk
Stainless: http://www.mcmaster.com/#98093A634

Flange is only 19mm vs 22.5 on the flanged screws. But button heads are slick.
http://www.mcmaster.com/#92095a422

If you're after the bling hit it on a buffing wheel on the grinder. Or pay $6.34/bolt :p

Those 1.5mm thread pitch bolts you have listed wont fit. Only 1.25.

(And why would you use a serrated flange on your aluminum b-pipe? That poor pipe…)

X2.
 
Last edited:
Was just throwing it out there incase anyone has problems with bolts vibrating out.

Good catch on the pitch, I removed it.

I'll see myself out now :rolleyes:
 

Ducky

Back in the game!
Location
Charlotte, NC
18 bucks for a set of nice tapered socket head FPP bolts is highway robbery? JM charges 24 bucks for a set of three...what am I missing?
 

BruceSki

Formerly Motoman25
Location
Long Island
You might be right.

I've grabbed a bolt out of my hardware bucket I thought was correct and it bottomed out before. Always double check without head pipe first to see how deep the bolt will go before bottoming out and if it will actually clamp the head pipe.
 
Top Bottom