FX-1 Fx1

[Swilson]

I ended getting this fx1 from another member it's 1995 fx1 with the tom21 pump tunnel.. The bond line are pretty much filled when I got it little sanding and I plan on laying carbon fiber for reinforcement when I received the hull the pump tunnel was removed and the conversion was close to where it needed to belittle cutting and what not I think the pump tunnel is getting close to where it needs to be. This will be my first build hopefully it doesn't take me me 10 years to finish
http://s1314.photobucket.com/user/Swilson44/media/image_zps888c2788.jpg.html
http://s1314.photobucket.com/user/Swilson44/media/image_zps6c17b978.jpg.html

 

[Swilson]

At the moment I have the pump tunnel fitted have not glassed it yet waiting to get a pump to check the fitting.. I cut the tray gun walls to make some foot holds. I also laided one layer on 12oz biax with epoxy resin on each side of tray and each side of engine compartment going to lay carbon fiber over each for a nice clean look pictures aren't the best but its what I have at the moment
http://s1314.photobucket.com/user/Swilson44/media/image_zps99c7195b.jpg.html?sort=3&o=3
http://s1314.photobucket.com/user/Swilson44/media/image_zps2930f17f.jpg.html?sort=3&o=2
http://s1314.photobucket.com/user/Swilson44/media/image_zpsdee3c504.jpg.html?sort=3&o=1
http://s1314.photobucket.com/user/Swilson44/media/image_zps742da38c.jpg.html?sort=3&o=0

 

[tburnett]

it's looking good man :bump:

 

['kotajoe]

Nice, im finishingvup my tom21 pump tunnel install right now, just remember to take lots of measurement while doing the install

 

[swapmeet]

Looks like fun, fairly clean ski for sure. Joe's right, make sure you're pump is where you want it etc before you lock it down.


BTW, on photobucket use the "IMG" code and it will show up like this.

 

[Swilson]

I was wondering why the pictures wouldn't show up at the moment the pump tunnel is just set in place havnt glassed it or anything waiting on motor a pump and of course $$ thanks for the comments

 

[Swilson]