Other i am to lazy sorry, what is the size and length off bpipe head bolts

[godocgo]

i need the complete size of bpipe head pipe bolts yami: diameter, thread and length. sorry i am sure it is already posted here somewhere.

lee

 

[Matt_E]

M10x1.25

Not sure on length.

 

[godocgo]

great matt, that is a good start i thought they were standard not metric ?

 

[SuperJETT]

45 length, metricspecialties.com carries them in stainless allen head.

 

[godocgo]

cool, anybody find them at ace hardware. got one of those a block away

 

[Matt_E]

Good luck.

The typical thread pitch for M10 bolts is 1.5.
I would be very surprised to find M10x1.25 bolts, let alone stainless, at any local store.
They are specialty.

Oh, and there isn't a single non-metric bolt on a Superjet..

 

[godocgo]

thanks guys you saved me the headache of driving around looking for them. i will just order them.

 

[Matt_E]

45 length, metricspecialties.com carries them in stainless allen head.

I've had a bad experience with a stainless allen head bolt galling to the aluminum manifold. The bolt broke off.

I've been back to stock Yamaha case bolts since then.
Or use grease or anti-seize.

 

[RoyalFlush@PCB]

Sorry, Lee. :sad6:

 

[sflsurfrider]

lee, you can use 3 OEM yamaha exhaust bolts for the headpipe.

i have some if you need them.

 

[godocgo]

i thought the exhaust bolts were m8? or do you mean from a stock exhaust pipe.

i bet i have those, i know i got to have three case bolts

charlie is your avatar inhaling or is your ski shotgunning someone

 

[sflsurfrider]

i thought the exhaust bolts were m8? or do you mean from a stock exhaust pipe.

i bet i have those, i know i got to have three case bolts

charlie is your avatar inhaling or is your ski shotgunning someone

i believe theyre the "muffler stay" bolts on the oem pipes that are used to connect the oem pipe to the oem head through the joing bracket. i know that when you remove a stock exhaust to put on a b pipe, there are 3 leftover oem bolts thats are identical to the FPP headpipe bolts, but not shytti.

im guessing you probably have more of them than i do.

----------

im actually giving my SJ a shotgun.

you have to reverse the polarity of the battery cables, re-time, and re-thread the bendix clutch for this to happen.

dont try it at home.

 

[BruceSki]

ive been using three short cylinder to case bolts i removed from my ski when i installed a girdled head... they work great and dont rust like FP junk bolts.

 

[2lick]

M10 1.25 x 40 long

 

[2lick]

ive been using three short cylinder to case bolts i removed from my ski when i installed a girdled head... they work great and dont rust like FP junk bolts.

yes these are the right size (M10 1.25) but.....

3 shortest are:
45 with 21 of threads
50 with 23 of threads
50 with 23 of threads

Id just buy the right stuff

 

[2lick]

i thought the exhaust bolts were m8? or do you mean from a stock exhaust pipe.

i bet i have those, i know i got to have three case bolts

charlie is your avatar inhaling or is your ski shotgunning someone

exhaust manifold bolts are M8 1.25 x 30 and 40 on a 61x cylinder

they may be bigger on the 62t, i think because arent the b pipe manifolds different....

 

[godocgo]

alright which is it 40 long or 45 long. i found case bolts and i found m10 x 1.25 40 and 50 at ace hardware

 

[Matt_E]

i found m10 x 1.25 40 and 50 at ace hardware

In stainless? :shocked:

 

[godocgo]

yes, it is stainless. the local ace is very cool.