I have a 62t/61x motor with an ADA head with 35cc domes. Also I have a b-pipe, what size jets should I go with?
Super Jet Jetting help
- Thread starter doubletrailerz
- Start date
- Location
- Stouffville, Ontario
http://www.x-h2o.com/threads/19403-Carburetor-(specs)-Database-SuperJet-and-Blaster-1
For B-Pipe (From Factory Pipe Website)
Main Jet: 135 (130 stock)
Pilot Jet: 70 (stock)
High speed screw: 1 2 turns out from closed
Low speed screw: 1 1/4 turns out form closed
Needle & Seat: stock (55 psi)
Spring: Stock (95 gram)
I went on ADA Racing and checked out the instructions to a girdled head and no mention of jetting changes were mentioned. I guess I would just run what FP suggests.
Good Luck
For B-Pipe (From Factory Pipe Website)
Main Jet: 135 (130 stock)
Pilot Jet: 70 (stock)
High speed screw: 1 2 turns out from closed
Low speed screw: 1 1/4 turns out form closed
Needle & Seat: stock (55 psi)
Spring: Stock (95 gram)
I went on ADA Racing and checked out the instructions to a girdled head and no mention of jetting changes were mentioned. I guess I would just run what FP suggests.
Good Luck