Blaster My Wife's Wave Blaster build, 772cc Freeride ready

[Aircraftsalz]

Started building my wife a Blaster.... Started with a all Stock, un toched Wave Blaster....

Pulled the ski completly apart.... Filling the oil window in, filled in the Choke & Fuel selector.. Cut open the rear tray & added some 1708, out with the rear foam, New rear exit exhaust....

Here's the build list

New Blue Peral paint top deck, Upper Black hood will be Silver, New Turf, Foot straps.

UMI Steering

Thrust Trim System, Hooker prop, Jet Dynamics intake & ride plate

Motor setup (Thanks Scottiemac) Started with a 62T/62T motor, Ported & Epoxy cases & cylinder, Bored so its now 772cc, 62T ebox thats getting a ATP EPIC, Dual 48 SRE carbs, Vforce 2's, R&D intake, New Thrust ADA 200 PSI head, Factory Mod Pipe.

Re enforced transom, Rear Exhaust, xmetal waterbox, Dual cooling, Rule 360...

Motor should rock, Scottie got me pointed in the right direction...

Hope to have it ready for Daytona, Wanna bust my Blaster Cherry.... From what I here Free Dinner if I flip this pig..

Its off to Paint tomorrow along with my RN surf hull... The Build starts after Christmas

 

[Billybo455]

plate to plate for dinner! haha. i can't believe you tore up that pretty stock ski!

 

[JetManiac]

I have seen this clean central florida freshwater blaster that Josh almost stole he got it so cheap!

Didn't we bore the cylinder to 771cc 85mm?

 

[Aircraftsalz]

plate to plate for dinner! haha. i can't believe you tore up that pretty stock ski!

Have you rode a stock Blaster? How did anyone enjoy them with a 61X/61X..... It will nice & fresh at the beach.... And the wife enjoys riding Blaster's, she wanted me to paint it pick. HAHAHAHA

I have seen this clean central florida freshwater blaster that Josh almost stole he got it so cheap!

Didn't we bore the cylinder to 771cc 85mm?

Hey that Blaster's Free after I sold the other one, lol

I let my wife ride it & it was over after that.... I think it was bored to 85 or 85.5.... Since I assembled it theres top secret stuff in there, you know aircraft stuff...

Its gonna go big or go home. I hope it gets together for Daytona

 

[ORGAN SPLITTER]

Cool! We are both on the same page. Although mine has been on hold for a bit. As soon as xmas is over I plan on painting. I wasnt gonna glass up the fill site but now you got me wanting to. What did you use to fill it? Should be a very cool B1!

 

[scottie mac]

Can't wait to see the finished product, Bro. Should be awesome. You always build such clean skis.

Scottie

Ps
Nothing wrong with pink! My wife's blaster is black white and pink.

 

[Dustin Mustangs]

If you are really going to try flipping this thing you should heavily consider some more reinforcements. Esp with all the work you are putting into making it look good. Cool build...

 

[Aircraftsalz]

I wasnt gonna glass up the fill site but now you got me wanting to. What did you use to fill it? Should be a very cool B1![/QUOTE]

I filled all the holes with Cabosil/3:1 Epoxy then a light coat of bond to smooth it out & fill small pin holes... Was very simple to do & I think will make the ski look great when painted.

If you are really going to try flipping this thing you should heavily consider some more reinforcements. Esp with all the work you are putting into making it look good. Cool build...

One Flip at Daytona & then its my wife's ski.... I'm not a Blaster rider, other wise I would re enforce the sides... I may hit a Sport Spec race or two this Summer...

 

[scottie mac]

LOL, now you are talkin!

Scottie

 

[Aircraftsalz]

Just got back in town, My Buddy has it all primmed.... Will be painted tomorrow, got my RN's painted today.... Time to get some ski's built

 

[orangefinger]

Blaster

Great Build !!

What are the plans with impeller & nozzle & intake grate & ride plate ?

I am running a 10/16 3mm cutback with a Riva Groovy rideplate , ocean pro extended nozzle and R&D Scoop

 

[Aircraftsalz]

Great Build !!

What are the plans with impeller & nozzle & intake grate & ride plate ?

I am running a 10/16 3mm cutback with a Riva Groovy rideplate , ocean pro extended nozzle and R&D Scoop

I'm going to be running a 144 OEM pump, Stator has been ported, 62T Raider reduction, Thrust Trim, Pro Tec Nozzle, 10/16 Hooker, JD intake & Ride Plate...

Going to ride it & see how that feels, should be pretty close....

I'm hoping to have it ready for Daytona, Free Dinner if she flips!

 

[Aircraftsalz]

Just got it back from the painter, still waiting on the very top cover. Going to start building it Monday, been working on my RN...

 

[FlightPlanDan]

Nice Looking!
Will your wife be hitting the spot with us?

My wife would love another female out there on a regular basis....as long as the water is warm. (Don't count on Lisa riding 'til spring.)

 

[Sanoman]

That blue looks like the color of my subaru.The blaster would look nice up next to it!

 

[Aircraftsalz]

Yeah that blue looks close... We sprayed a blue base that we used on my Superfreak, the 2 coats of House of Kolor pearl blue... It looks cool in the sun


Hey Dan I think my wife will be riding this summer. Might be more lake riding then surf this year....

 

[Aircraftsalz]

Not a lot getting done on the Blaster, been working on my SF & RN... I did snap a pic with the Silver upper cowl on..

 

[McDog]

Is your wife going to ride this in Daytona?

 

[Matt_E]

Awesome kolors, Josh.

 

[FlightPlanDan]

Yeah that blue looks close... We sprayed a blue base that we used on my Superfreak, the 2 coats of House of Kolor pearl blue... It looks cool in the sun


Hey Dan I think my wife will be riding this summer. Might be more lake riding then surf this year....

Oh no! It's true!






You've gone over to the Dark Side.