N3vrSat1sfied
Military Member
- Location
- Fort Worth, TX
Well decided to add a third ski to the fleet (have my DVX for AM freestyle, 2012 Superjet for racing Lites, and now this FV1 for the wife and boat chasing). I couldn't pass up the deal when Tony posted this one up. I should have the hull soon. So far I'm super happy with my dealings with @ridetrp. I didnt ask him to do this but he re buffed the ski and sent me pictures afterwards. Also said he was gonna respray the engine bay so it looks like new when I get it. I plan to design it however the wife decides (really need her to like this ski), not sure if we are gonna paint or do some graphics/wrap. I know it will be primarily blue.
Specs:
Hull:
FV1 Prototype http://www.x-h2o.com/index.php?threads/prototype-tigercraft-fv1.177446/#post-1882117
Aura pole
RRP steering with straight bars
Troy lee odi grips
Jaz 2 gallon fuel cell
UMI throttle
Custom worx intake grate
Engine:
@powerhouseperformance 760, Fully ported and epoxied, stock stroke 62t/62t.
Oem 44s Pilot Jet = 117.5 Main Jet = 115 Needle/Seat = 2.0 Spring = 80g Pilot screw = 1-1/4 Main Screw = 1-1/4
Vforce 3
ProK Flame arrestors
Powerfactor exhaust with pfp box ran wet
Jss ebox with msd
@OCD Solutions stator
@speedysprocket lightened flywheel
Pump:
OEM 155 pump
5/12 impeller thin blade cutback
Wet wolf cone
Xmetal trim with flow guard
upsweep nozzle 87.5mm/92mm steering
Will add more details as I get parts etc.
Specs:
Hull:
FV1 Prototype http://www.x-h2o.com/index.php?threads/prototype-tigercraft-fv1.177446/#post-1882117
Aura pole
RRP steering with straight bars
Troy lee odi grips
Jaz 2 gallon fuel cell
UMI throttle
Custom worx intake grate
Engine:
@powerhouseperformance 760, Fully ported and epoxied, stock stroke 62t/62t.
Oem 44s Pilot Jet = 117.5 Main Jet = 115 Needle/Seat = 2.0 Spring = 80g Pilot screw = 1-1/4 Main Screw = 1-1/4
Vforce 3
ProK Flame arrestors
Powerfactor exhaust with pfp box ran wet
Jss ebox with msd
@OCD Solutions stator
@speedysprocket lightened flywheel
Pump:
OEM 155 pump
5/12 impeller thin blade cutback
Wet wolf cone
Xmetal trim with flow guard
upsweep nozzle 87.5mm/92mm steering
Will add more details as I get parts etc.
Last edited: