Freestyle Replacing Stock choke with Primer on stock 38's

[gc4]

I did some searching but didn't come up with anything solid. I've read on the site, here and there, people advising a replacement of the stock choke system on an SJ stock 38's to a primer kit.

What are the reasons to do this? What mods need to be done to the carbs to do this?

Thanks for the help!

George

 

[Shifty]

In my opinion, don't do this. From what I have experienced and read, the choke plates need to be in place to allow proper fuel metering. Both my Waveblaster and superjet suffered after I performed this operation.


I feel it should only be added when you move up to aftermarket carbs

 

[Mark44]

X2 or if you do install primer fittings leave the choke assembly in place. and just remove the cable and lock them open.

Mark44

 

[Dustin Mustangs]

If you have converted to premix and are running the stock flame arrestor you can use the bosses on that to hook your primer lines to.

 

[gc4]

Alright, thanks for the advice.

I would rather leave the choke the way it is anyway.

 

[Tyler Zane]

mine are out, but there isnt much about my 38's thats stock.