Return line jet size

[Tpete115]

Looking for some input on what size jet to put to put in the return line on my setup. I have a pair of 46mm sbn's with the returns drilled out. I have read some are using 60 and some are running a 70. Just looking for some input. Thanks

 

[jo5hi3]

i ran a 60 in a set of mikuni 46's i drilled and my full specs came with a 60.

 

[DAG]

60 is a pretty common on any set of duels. Triples like 120

 

[txsuperjetfreak96]

Ed told me 60 for my fullspec 48s


Sent from my iPhone using Tapatalk

 

[Tpete115]

Cool thanks guys

 

[just joe]

My x-scream 46's were set up with a 65 return jet.

 

[Jakobi86]

So are you guys running the jet in the line itself or drilling and tapping the carb to accept the jet?


Sent from my iPhone using Tapatalk

 

[badvinny]

So are you guys running the jet in the line itself or drilling and tapping the carb to accept the jet?


Sent from my iPhone using Tapatalk

Either or, I prefer to tap the carb line.

 

[DAG]

I like to drill and tap the fitting at the tank mainly bc I have duel and triple carb skis.