Stealth Enclosed Build

[N3vrSat1sfied]

Picked up this Stealth 6x12 v nose enclosed before moving from Michigan to Texas. I haven't been able to do anything to it yet but just started ordering the E track stuff, flooring, and a few other gadgets.

For flooring I wanted something that would resist the water and hold up so I went with: http://www.homedepot.com/p/HDX-7-5-...l-Flooring-HX45DT714MB/205442047?N=5yc1vZb97t
They say it is resistant to even battery acid and is meant for cars to park on so should be sturdy enough. Will start the build next weekend or so.

 

[N3vrSat1sfied]

Sent from my iPhone using Tapatalk

 

[blaster800]

Nice find on the flooring ! I only saw the tiles when I looked there ... Ill go back and check it out !

 

[N3vrSat1sfied]

Nice find on the flooring ! I only saw the tiles when I looked there ... Ill go back and check it out !

It's online only. Ya I didn't want to do the tiles, when water/fuel gets in the cracks and underneath them they peal up. When I was younger we had a laminate checkered flag floor in our mx trailer with tiles that had that issue.


Sent from my iPhone using Tapatalk

 

[N3vrSat1sfied]

One color done, headed to the lake this afternoon!


Sent from my iPhone using Tapatalk

 

[Dirtybird]

Nice. That brightened it up a bit.

 

[JMew03]

Trailer projects are always fun to watch. See what ideas people come up with.

 

[N3vrSat1sfied]

Trim done, now the skis are loaded up and ready to head to the lake. Jonathan you coming?


Sent from my iPhone using Tapatalk

 

[N3vrSat1sfied]

Sent from my iPhone using Tapatalk

 

[shaunsteezy]

sweet trailer! i built mine last summer because i store my skis outside. same size as yours. i striped all the flimsy plywood and re did the walls with 1/2" 6 ply, sprayed bed liner, and then put etrack in. its just the right height to stack skis so i can put 4 inside

 

[N3vrSat1sfied]

sweet trailer! i built mine last summer because i store my skis outside. same size as yours. i striped all the flimsy plywood and re did the walls with 1/2" 6 ply, sprayed bed liner, and then put etrack in. its just the right height to stack skis so i can put 4 inside
View attachment 273795 View attachment 273796View attachment 273800

Nice, I was debating stripping the filmys wood off, but I only plan on two skis with a shelf above them for beach cart, stands, ez up, etc. So Ill just put my etrack on a stud. Trying to figure out if I want to do a workbench up front or put in a tool box.

 

[j0hnny]

tool box big enough to use the top as a work bench!

 

[blaster800]

I have a work bench about 1 ft deep with shelves above and below . then just rear of the front door I have vertical e-trak on both sides that I can add a cross beam across the trailer and above the skis , toss some plywood pcs on top of the bench and the crossbeam and you have a bed ! store the plywood pieces anywhere when not needed .

 

[skinnyman]

Got tired of cleaning mud and sand out of the trailer, 50cent cars wash can have it now

 

[JMew03]

Thats a cool idea Larry

 

[N3vrSat1sfied]

tool box big enough to use the top as a work bench!

That's what I was thinking, but probably make better use of the space by building a workbench with a shelf.


Sent from my iPhone using Tapatalk

 

[JMew03]

A tool box big enough to use as a work bench would be way to heavy. Lol

Get you a cheap craftsman box and fill it with lake tools. Build a shelf in the front for a work bench.

 

[j0hnny]

buils a work bench big enough to sleep on. mattress folds up against wall u have a table. put tools in drawers below said wood table. camp in trailer.

 

[N3vrSat1sfied]

There will be a shelf above the skis.


Sent from my iPhone using Tapatalk

 

[j0hnny]

but is it big enough to sleep on???