Tandom Trailer-Extreme Makeover

[YAMA CAT]

We bought this trailer in 03' for our previously owner Runabouts. Since then we have rigged it for a SJ and SXR....... Then the Squarenose came along. We been strapping it to the tongue. It works but we look like the Clampets going down the road.

I'm on a mission to convert this into a triple Standup Trailer :arms:
Here's a before picture, and a sketch on what I want it to look like afterwards.

 

[brentR]

that looks like fun. ive been tryin to figure out a way to convert my single to hold my blaster and sj... anyone think its possible?

 

[feartheride]

I think you better flip thse 2x4,s on there edge before you find yourself dragging $15.000 worth of fiberglass down the road

 

[Hogggman]

BrentR I have a single r/a trailer carrying my blaster and Sj guy I bought it from put a wood deck on it with pvc runners. Sorry for hijacking the post PM me for pics.

 

[LBE]

that looks like fun. ive been tryin to figure out a way to convert my single to hold my blaster and sj... anyone think its possible?

Thats what I did, tight fit. For the Blaster, instead of a 2x4 I used a 2x6 so it sits higher and the bond limes on the ski overlap. It's nice to have 2 skis on a trailer that is not 10 ft wide.

 

[YAMA CAT]

I think you better flip thse 2x4,s on there edge before you find yourself dragging $15.000 worth of fiberglass down the road

No Worries the the sketch was quicker to draw with the 2x4 flat, than to angle them in the isometric view. The bunks will be attached to swivel brackets which will be angled and positioned for each ski.:wink:

brentR, How wide is your trailer? Have a pic?

 

[YAMA CAT]

Naked Trailer. Already killed a grinder..... back to Ace I go:biggrin:

 

[Big Kahuna]

get a sawsall to cut off the bracket (Tabs)

 

[YAMA CAT]

I don't think Jarrod will allow me to have a SawAll:scared:

Back with a fresh Grinder:biggrin:

 

[Keith]

A friend of mine set up a double runnabout trailer to hold 3 standups side by side. Looked really nice.

 

[brentR]

LBE u got any pics of that?

 

[Mouthfulloflake]

Here is what I did Hoggman, 2 SJs, but the taller bunks or slightly wider spacing would do, I once put a VXR on this trailer with the SJ...

http://www.pwctoday.com/showthread.php?t=38898

( dont laugh at the VXR pic... I lost my other hitch pin!!!!!!!!!)
it made it home ( about 2 miles)

:biggrin:

BrentR I have a single r/a trailer carrying my blaster and Sj guy I bought it from put a wood deck on it with pvc runners. Sorry for hijacking the post PM me for pics.

 

[kingnothing3]

I think you better flip thse 2x4,s on there edge before you find yourself dragging $15.000 worth of fiberglass down the road

my exact thoughts! i just started a trailer project of my own. It is a tandum axle four place three seater trailer. I am converting it to carry four standups and the front will be flat for my fourwheelers. Ill get some pictures

 

[YAMA CAT]

Hey BK just bought a Reciprocating Saw:Banane01: :Banane01: :Banane01: :fingersx:

This going be fun! Jarrod is safe he just went to work:wink:

 

[Hogggman]

Mouthful Maybe that is what I should do It wouldnt look so hillbilly even though we used my trailer to play drinking games at wave rave.

 

[steve802cc]

Back with a fresh Grinder:biggrin:

When I first read this I thought you said "flesh" grinder.:scared:

 

[RoyalFlush@PCB]

When I first read this I thought you said "flesh" grinder.:scared:

Funny, Steve---I didn't know you were versed in Japanese.

:27: Sorry if I offended anyone. :biggrin:

 

[YAMA CAT]

I made sure my husband was a safe distance before I picked up any power tool........ No flesh grinding has occurred in the execution of this project... Yet:bigeyes: :stooges:

 

[YAMA CAT]

We've got the bunks on. For those who were concerned about the bunks being flat you will see that they are at an angle. Tie down straps do wonders for keeping the skis on trailers too. :wink:

 

[Frosty]

Looks good bro. Nice job.