The Little Jet ski that may float.

[424skipimp]

Well were to start i bought this waterdawg ReV hull no paper work but come to find out i heard that its not a problem to get paper work from DMV wihen applying the proper tricks. Ok so ithis is my fiirst ever attempt and modding my own (freeride) Jet skii the hull was in the worst shape i ever seen it made allot of 1990 superjets looks like a pearl but with a lilttle time sweat and cussing like pirate she pulled thru (i hope) . i replaced ever line insert wing nuts and doo hickes that look out of place as as well and reliline the pump the delal inside the hull and motor as welll as re doing the plates it siits on. i fixed lots of hole and crack in the body of the ski as i re sealed the tray layed cardbon ove it with pinkl foam under iit and then got a wild hair up my ass and went for the front rockers bets thing i personaly think i diid umm i dont know irs been a lil while since i have see it or heard from anyone. but all in all i did all this work by yhe edge of my seat and i feell good about i hope it ride like a nice caddy But with luck it will be a sandwich and fruit know that. andway here is pics of my thng and ya. i am going to apploagize in advance and i cant spell nor do i use proper punttuations wwell i got news for them lol
PLZ PLZ PLZ LEAVE UR COMMENTS I WANA SE WHAT PEOPLE LIKE ABOUT IT ANDD WHAT THEY DONT'
REAL REALK BNUT AS THE DAYS GO ON ILL REMMEMBER MORE ND FILL YA IN FOR SURE

 

[MADMAT]

Well???? Lets see...

 

[N3vrSat1sfied]

 

[keno]

View attachment 244480

X2

Sent from my SCH-I545 using Tapatalk

 

[424skipimp]

here is a cpouple to start ill have more in a lil while as well with that current plans

 

[swapmeet]

That chicks trigger discipline is as bad as your typing. Sweet. Baby. Jesus.....


Edit*
Well the work you've done makes up for it, looks pretty good. So those are Foot Rocket holds that will mate to the Gunwale side of BOB holds?

 

[MADMAT]

Very cool build!!!!!

 

[N3vrSat1sfied]

nice scupper delete. lol

Build looks good, nice work!

 

[MADMAT]

Do you live by waves?

 

[424skipimp]

i didnt see any reason not to do it

 

[MADMAT]

How did you glass in your motor mount plates?

 

[424skipimp]

I am about a 2 hours drive from pismo beach and the motor plates ok check this out so u have the chime the dips down making it had to get them nice and level and what not so i took this panel i made from fiber glass ans the tickness was perfect i glued those down first and sanded them leverl and toook the plate\s and used g flex to glue ther plate down fill holes and so on, layed another layer inside and sanded the tops
also used filler around the sides

 

[MADMAT]

That should be a wave shredding machine now!! Can't wait to see final pics and ride report!

Pics of mount area!!??

 

[iangdesign]

Good job so far but your first two pics are like looking for Waldo...I looked all over the flower and in the desert landscape and saw no hull. Can you point it out for me?

 

[424skipimp]

Madmatt of course and plz do feel free sto ask for pics or how i did something cuz i may not think of it

 

[424skipimp]

iangdesign hahaha as well did i. to tell u the truth im not quite to sure how those pics even go there loll

 

[424skipimp]

soo as i keep building this jetski hull i sometimes sit back and wonder wtf i am doing? did i go to far with rockering the front? How is the hull going to handle did i possible improve it or am i makin it worse i would like to think im improving on it i got the weigh down from 110-115lbs to just a lil above 80lbs . So i guess where im at on the hull this moment it how should i go about finishing up the rocker on the front and installing these footrockets footholds. part of me wants to cut the gun whales down and re shape then to make the footholds not only look good but as well get the most out of them as i do not think i was adjutabilty i think i wanna find that sweet spot and mount them solid. i dk im at the point in the build were i have kinda hit that wall

 

[MADMAT]

I think I would roll with what you have done there and ride it! ASAP!

 

[424skipimp]

Hell ya thats the game plan ok so as it sits right this min i have added the cool pink stuff from home depot in the trey i also like the fact that u can sand it to take that ever shape u what. i replaced every line that was under there along with new threaded inserts and i got ride of that stupid battery trey in the bulk head. back to the front rocker im going to take a pic of the inside of the hull and maybe someone could give me some help on how i should go about finishing it. thanks goodnight see yall in the AM

 

[424skipimp]

That chicks trigger discipline is as bad as your typing. Sweet. Baby. Jesus.....


Edit*
Well the work you've done makes up for it, looks pretty good. So those are Foot Rocket holds that will mate to the Gunwale side of BOB holds?

cool man thanks. no i had bob holds in it but there junk i think so that kinda why i wanna cut the side of the tray down to make the footrock holds flush or close to it. i also have a set of foot rocket tubbies i wanna add