Blaster trailer bunk width

[doorslammer]

hey all

just curious what width bunks are place on the trailers for blasters.

i have a rolled over hilux i was going to get some pvc pipe and screw it down on the tray, then put another set on hinges with a winch up front to just winch the ski up out of the water at the ramp.

would pvc support a ski, im thinking not, so maybe T'ing a support leg in the middle with the end ones also?
and possibly putting a roller at the end of the tray to help transition?

just looking for opinions while keeping it cheap untill i get a trailer

 

[NVJAY775]

3" schedule 40 pvc holds my b1 and rn. I winch up both into the truck using a ramp made from it. It was a half assed ramp that was basically 2 - 7' sticks of 3" held together with three pieces of 2"x6" wood studs, spaced at 12.5". I'd show u a pic, but I was using it for a stand at the lake and it floated away in the last storm. Oops...

 

[4iflounder]

My bunk width is 17.5". the blaster from the center line of the hull there is a V and it curves up to a flat horizontal part. My bunks rest under that horizontal part on each side of the ski.

 

[NVJAY775]

I went 12.5" so I can fit other skis too. Like my rn, or my sons 650sx. And all our shop carts/stands are 12.5" also.