- Location
- Kawartha Lakes Ontario
Hi guys, just wondering what make of waterboxes everyone is running in there Octane
Octane waterbox recommendation
- Thread starter Mike D
- Start date
speedysprocket
Alex
- Location
- Chesapeake, VA
Stock
steve-uk
Manners cost nothing
- Location
- Barrie - ontario
couple local guys have ran the ATP waterbox, takes a little fitting, you need a 90 degree hose and a flex hose but ride reports were good
however a "stock" water box in an octane i believe is a factory pipe waterbox, so unless you blow a hole in one dont touch it
however a "stock" water box in an octane i believe is a factory pipe waterbox, so unless you blow a hole in one dont touch it
- Location
- Kawartha Lakes Ontario
Thanks guys, we had a ATP in it this summer, found it helped power wise but was too loud for me.
- Location
- Edmonton, AB
I thought the ATP was suppose to be as quiet as stock?
- Location
- Kawartha Lakes Ontario
From my experience it was much louder. Maybe on different skis its different.
steve-uk
Manners cost nothing
- Location
- Barrie - ontario
Volume increases on an atp if you run a flow valve cos they run pretty dry. . . They are deeper than stock and slightly louder
- Location
- Bradford, ON
For some reason the ATP waterbox was quite a bit louder on the octane with no flow valve. Steve I would agree with you on an other motor setup. Your ATP on your 718 last year sounded really nice and just a bit louder than stock imo.