what carb is best for my 61x build

[Fro Diesel]

i am building a 701 for my sn (don't laugh). I purchased a wetjet intake with some kind of reed in there. I will be putting a b-pipe on. What flywheel, and reeds, and carb would be best? I will get an enhancer. my guess from what little i know is team scream ported 46 or 48. think single for reliability

 

[Matt_E]

I'm loving my single 48 Full Spec on a ported 61X case, ported 760 cyl, with lightened flywheel.

 

[accbr]

I did the same thing when I first got my SN. Bought a wetjet 46 Mikuni off ebay, and my friend had the wetjet intake he gave me. Worked great. I sold it to put the money towards some 62t cases and a 49mm Full spec. I'm just running a stock intake and 44mm on the 61x now until I get motivated to drop the other motor in there.

I had the 46mm carb jetted 145M 120P 2.0N/S 115g spring with a b pipe.

 

[michaelart]

I have a wetjet 46mm carb for that specific intake (bolt spacing is wider than stock 44s) Let me know if interested......

 

[Big Kahuna]

get the 46 wetjet carb!!!!!!!!!!!!!!!

 

[Fro Diesel]

PM sent. Anyone got a 62t flywheel laying around? and can i put my current stator on the 62t flywheel?

 

[RoyalFlush@PCB]

PM sent. Anyone got a 62t flywheel laying around? and can i put my current stator on the 62t flywheel?

Nope. You need a 62T stator to run a 62T flywheel.

 

[Mouthfulloflake]

I recently tried a carb that was bored to heck, about 53mm, and has NO bombsight, no obstructions, and it hits much harder than my stock sbn44 on 61x cases.

 

[yamanube]

I recently tried a carb that was bored to heck, about 53mm, and has NO bombsight, no obstructions, and it hits much harder than my stock sbn44 on 61x cases.

Keith Head carb?

 

[Mouthfulloflake]

I think it might be, either that or SRE, its got the tiny holes drilled around the inside ( annular discharge)

the craftsmanship isnt great, the hiuge bore went thru the carb casing at a few places around the top ( holes) but IM surprised at how well it works.

Keith Head carb?