Super Jet What parts out of a wave venture fits superjet?

[Bruno]

Just picked up a square nose hull and a running wave venture....

What parts will i be able to use on superjet and what other parts will i need to get?

 

[ang4th2]

what year and engine size wave venture ? and what year SN ?

here you can use this site to punch in teh wave venture and cross reference parts

http://www.partzilla.com/

if it is s 701 or 760 I would say engine, electronics, engine mounts, throttle cable, start stop switch .. the left over fuel haah .. etc ..

 

[Bruno]

90 Superjet and 95 wave venture with 701

thanks for the info

 

[BruceSki]

Motor and electronics. If the Squarenose is 94 or 95 you can use the midshaft housing. Start stop switch.

The exhaust manifold holes in the cylinder will require helicoils for an exhaust that will fit in your Superjet. Or you have to drill the mounting holes in your exhaust manifold bolt holes larger.

Parts of the pump will transfer over but not all of it. The prop if its even worth using.

 

[ang4th2]

I would say the whole pump but may have to mod the bolts the two sections that hold together on a superjet .. the impeller housing is threaded on a sj and maybe not on the venture no big deal .. you can mod that slighly a few different ways .. shaft is different and engine mounts are couch mounts but we are using that type in our sn sj ..
of curse teh start stop switch can be used but your going to have to lengthen it ..
pull every single nut and bolt and all hardware off that venture .. you never know what wil come in handy .. hoses , clamps etc .. finger trigger etc ..

 

[Bruno]

thanks for the info!

Let me starting turning some wrenches and we will see what i come up with lol Will post up pics for feedback!