Freestyle XS 900r Setup's

[Rowley286]

Curious to see what components people are running on their 900r's and hearing some feedback. I'll start..

XS 900R - pump gas (180psi)
Full Spectrum 49's
XS intake with RAD valve
Powerfactor pipe ran wet with a 105
XS ported exhaust manifold
Setback 155 skat MAG
Reduction nozzle bored to 89mm
Thrust trim nozzle bored to 94mm
8/16 thinblade cutback 3mm
Charging system with enhancer
Zero lightened flywheel

 

[Freakrider]

XS 900R - 33.8 cc custom domes for MSD TL / 93 pump
Extended life HP Deka 9 (more plates)
49 FS's V-6
PHP mani/ VForce 3
PFP- dry
155 Skat SB
11-17 thin blade cutback 5 mm.
Uptilt reduction nozzle 90.33mm
Thrust trim nozzle 93.35mm
XS trim ring with flow guard
Hits very nice.

 

[Rowley286]

XS 900R - 33.8 cc custom domes for MSD TL / 93 pump
Extended life HP Deka 9 (more plates)
49 FS's V-6
PHP mani/ VForce 3
PFP- dry
155 Skat SB
11-17 thin blade cutback 5 mm.
Uptilt reduction nozzle 90.33mm
Thrust trim nozzle 93.35mm
XS trim ring with flow guard
Hits very nice.

What hull? Flatwater boat? I think my prop pitch may be too low. XS had originally recommended an 11/17 but that seemed awfully high.

 

[Freakrider]

What hull? Flatwater boat? I think my prop pitch may be too low. XS had originally recommended an 11/17 but that seemed awfully high.

KDX hull and yes Bogart recommended a 11/17 and 5 mm cutback which has worked really well.