Recent content by be_lain

I’ve got an AC aluminum -2” pole for a 90-95 with spring. Pm if interested

Out of stock currently, but RSKI has them for $930 https://www.rskiriders.com/product-page/factory-pipe-b-pipe

I got the p1 sponsons from Meeker . He designed them in CAD. Really liking them so far. They were about $425 with shipping and come with hardware.

The 62T head is set up for a couch pipe. So the water outlet on the head pointing towards the bow would ordinarily face the other way on a 61x head and go to the exhaust midpipe. I would not dump that overboard without adding a tee and running a line to your exhaust midpipe. Also recommend...

Finished up my crusty square today. Lake tomorrow!

Why do you have to be in Florida!

Mine is off of a pre 08, not sure if it’s compatible? I’ll check but if so I’m interested.

Looking for a RN chinpad. Condition doesn’t matter as long as the plastic is in good shape.

I’m in for another one if you do a run anytime soon!

I’ve got one, PM me

Meeker

Mocked up the Meeker P1 sponsons on my SN last night. Stoked to get these sealed up and get them in the water!

Yeah send me a pm with your email I’ll send it to you. I would say skip doing porting on your own and buy a kit. I really like the JM/Blue ported 61x top end kit. I did mine at a 718 (+1mm) and it has killer low end. Super reliable too, I have beat on it and it has held up. I have built a couple...

One thing I didn’t see on your list is a midshaft spacer. Aftermarket hulls (tigercraft at least) need the spacer for the mid shaft to seal properly against the bulkhead. I forgot this on my SV1 build… Also don’t forget about misc hardware, hull hooks, other little stuff. This stuff all adds...

The RSKI nozzles will work on 08+ as well