Search results

Hi, have an EME Aerial 8 Hull with a modded 701 Yam motor, it runs strong but have just realised that I don’t have any breather tubes into the hull, do people run tubes in their EME hulls, thanks Dom

Had this happen and used a long self tapping screw that went into the plugcap then used grips to pull it out with the cap

Thanks I have an SXR cable but it is a lot longer than the Superjet that was too long,how do you loose the excess cable, thanks Dom

Hi, what do people use for the steering cable for the Ariel 8, used a Superjet cable but was long and not a good fit-t failed after a couple of sessions, thanks Dom

Hi, just received my Solas jet pump(SXR) for the Ariel 8, was waiting for the £-$ to improve but need some advice as to what impeller to use as a base-don't mind repitching as long as it's not too far out,thanks Dom

Had the ski in the water today(lake only just opened for the season) and disappointed as it just does not hit-just revs through. Engine is 701 with pump gas head,ported with case work, lighted flywheel,B pipe with modded water box. When the motor was in my superjet it hit very hard although it...

Hi from the UK,I am building an Aerial 8 with SXR pump and 701 motor, hull was second hand with the SXR pump/driveshaft fitted. Pump had been shimmed at the rear but alignment with the shaft was way off and the impeller was loose, once the impeller was tightened up the shaft support...